Individually Addressable LED Strip: You can control each LED individually! Each SMD 5050 LED has an integrated driver IC that allows you to control color and brightness independently or add sophisticated lighting effects to your project. 256-bit luminance displays and 24-bit color display. Chasing Lighting, Rainbow, Fire, Meteor, rhythm, etc all kinds of scenes and special effects.

Compatible with Multiple Controllers: Our ws2812b ic led strip is compatible with RB3+SP630E, SP611E, SP608E, SP602E etc Bluetooth music Controllers, SP530E, WT-SPI, SP511E etc smart 2.4GHz Wi-Fi Alexa music controllers, and you can design DIY effects according to different requirements.Chasing Lighting, Rainbow, Fire, Meteor, rhythm, etc all kinds of scenes and special effects. Dream full color Programmable LED Strip.

Connectable&Easy Installation: RGB LED light has a 3-pin JST connector and separate power/ground wires at both ends. Each WS2812B LED light bar can be easily connected end-to-end through the 3-pin JST connector, power/ground wires is used to feed power when the voltage drops.You can cut or connect the led strips to meet your needs.

Wide Applications: DC5V LED strips is safe for children and pets.These LED lights can be used in hotels, karaoke TV, bars, gambling halls, Christmas decorations to improve atmosphere, for cars/shops/homes, etc. use. Note: IP30 not waterproof, only suitable for indoor decoration; IP65 silicone coating waterproof, can be exposed to water for short time.

Please Note: Only Supports DC5V Power Supply. Never use 12V or 24V power supply. Please do not use higher voltage than 5 V, otherwise the entire strip will be damaged. Light up 1 color（red or green or blue or pure white) 0.1W/LED. Light up 2 colors (red+green) 0.2W/LED, Light up 3 colors (red+green+blue=mixed white) 0.3W/LED. In addition, each LED can be switched off individually without damaging the residual strip.

Warm Tip: If the WS 2812B ECO LED strip cann't light up, please check it by following steps : 1. the power supply only support 5V. If the voltage is higher than 5V, the strip may be burned out. 2. Please check if the connected controller or remote control is SPI RGB controller that has a voltage range of 5V (5v/5-12v/5-24V). Wrong controllers can may not turning on or causing color fading. 3. Connection method correct or not. It can be cut along the dotted line and connect by 3PIN SMD 10MM or 12MM connector(need to choose the correct width connector). If you have any questions or concerns of product usage, please feel free to contact us and we will assist you in resolving them.