Fits most 1 3/8" and 1 1/2" tub drains, if your drain cross bar is badly corroded, it may not be suitable, then you possiblely need a tub drain extractor

Better used combination with adjustable wrench or screwdriver

Suitable to be used to install and remove tub drains and spuds, your helpful plumbing tool kit

Heavy duty die-cast aluminum construction, rust free & won't scratch the bathtub surface

Dual ended tub drain remover tool

Product dimensions: the small end's diameter is Φ1.3 ''/3.3cm and large end's diameter is Φ1.42''/3.6cm and Φ1.54''/3.9cm, respectively. Contact us with any questions or concerns

Instructions for use: 1, select correct end of tool for the tub drain, and the small end of the wrench is used for bath tub drains. 2, insert the tool into the drain. 3, insert screwdriver into the tool or adjustable wrench around body of the tool. 4, turn counterclockwise to remove the drain; turn clockwise to tighten the drain

NOTE: The tool fits most 1 3/8" and 1 1/2" tub drains. But the following types of drain will not work correctly: 1,the metal disk in the middle of drain is too big; 2, the crossbar is badly corroded; 3, three prongs drain not four. Please check the product specifications and descriptions below carefully before purchasing