Galleon 2025Download our mobile shopping application for faster and easy transaction.
Product ID:
298983
Identifier:
B000WZCNBC
Brand:
Bondo
Model:
262
Shipping Weight:
2.16 lbs
Manufacturer:
3M
Shipping Dimension:
6.38 x 4.53 x 4.41 inches
₱2,041
+ ₱ 1,323
Shipping Cost from USA to Philippines inclusive of custom fees.
Cost too high? Check weight and dimension on product details and click "I think this is wrong?" link.
Get it between 2025-11-22 to 2025-11-29.
Additional 3 business days for provincial shipping.
- Price and Stocks may change without prior notice
- Packaging of actual item may differ from photo shown
Cash upon Pick-up - orders grand total must not exceed ₱5,000.00. Order will be pickup at Galleon's Office.
Cash on Delivery - orders grand total must not exceed of ₱10,000.00 and must not exceed ₱5,000.00 for provincial areas. See all payment methods
ORIGINAL FORMULA for repairing dents, dings, holes, large rusted areas and scratches in vehicles
TWO-PART lightweight compound mixes easily and spreads smoothly
SPREAD EASY and cures in only 20 minutes for same day repairs
FORMULATED TO BE NON-SHRINKING
SUITABLE FOR wood, steel, aluminum, fiberglass, and concrete
Lightweight and sands easily
Can be shaped days later
Lightweight and sands easily
Can be shaped days later
Formulated to be a non-shrinking, non-reactive and permanently durable material
Restores chips quickly and easily
Repairs dents, patches holes and leaks
Bondo Original Filler instructions: Step 1: Clean all surfaces with soap and water followed by a low VOC compliant cleaner. Allow to dry. Step 2: Sand the damaged area with 80 grit sandpaper to remove all paint, primer, and rust down to bare metal. Sand 1-2 inches beyond damaged area. Clean again with a low VOC compliant cleaner. Step 3: Stir the filler before using. Knead the hardener tube. For a 3-inch diameter puddle of filler, squeeze out a 3” long strip of hardener. This is the maximum recommended amount to mix at any given time for optimal application. Mix thoroughly to a uniform color on a clean, non-porous surface. When product is mixed, the working time is 3-4 minutes. Do not add hardener directly into the filler container. Step 4: Spread an initial thin layer of the mixed filler over the repair area using firm pressure to ensure maximum adhesion. Apply additional layers of filler as needed. Allow filler to cure 20 minutes. Step 5: Rough shape the filler with 80 grit sandpaper. Finish sand with 180 grit and finer. Featheredge the repair. Wait 45 minutes and apply 2-3 coats of primer to cover the repair area. Step 6: Apply Bondo Glazing and Spot Putty to fill in small imperfections and re-prime with 2-3 coats. Follow paint manufacturer’s recommendation for priming and final finishing. For best results apply at 45°F (7°C) or above. Do not put mixed filler back in the can. Clean tools with acetone or lacquer thinner.
Buy products not available in the Philippines.
