[Specification Size] Luckman 242193203 refrigerator seal approximate size is: 17.91”x 28.74”, please measure your old gasket size carefully before ordering. [NOTE-1] This 242193203 gasket is used for the top freezer door. Fits various Fri-gidaire & Ken-more appliance models; please confirm this part is correct for your model before ordering. 【Worry-free Shopping】Many door gaskets look the same but are not the same size, Please note: Measure the size of the old sealing strip before purchase to ensure model compatibility and avoid unnecessary trouble.

[Premium Construction & Durability] 242193203 fridge door gasket seal Made from flexible, heavy-duty rubber designed to withstand extreme temperatures while maintaining a tight seal.Enhanced Seal: Prevents cold air leakage, stabilizes internal temperatures, and reduces energy costs. Tear-Resistant: Reinforced edges resist wear and tear, extending the lifespan of your refrigerator’s door seal.

[Built-in Strong Suction Strip,Great Sealing ] Our gasket 242193203 uses thicken magnetic strips, resistant to bending, strong suction for effective sealing and functions the same as original OEM-branded parts, but quality seal better than OEM. Perfect insulates the outside air and creates a low-temperature environment to keep your food fresh. You no longer need to worry about food being oxidized or contaminated, 242193203 freezer door seal will guard the deliciousness for you.

[242193203 Repair Symptoms] Durability ken-more refrigerator freezer gasket 242193203 can perfect solve following problems: ➊Door gasket broken torn, worn ➋ Moldy & dirty door gasket ➌Leaking / poor seal, temperature not staying cold. ➍Condensation builds up/ frost / ice build up inside. The inside of the magnetic stripe adopts advanced "strong magnetic sealing" technology, and the it is made of external environmentally friendly and non-toxic materials effectively extend the life of the refrigerator.

[F242193203 Freezer Door Gaske Replace Part Numbers] 242193203 fri-gidaire freezer door gasket can replace these part numbers: 3513462, AP5806624, PS9492371, EAP9492371. More compatibility, please check our product page. If your model or part number is not found or you are not sure whether your model is suitable, please contact us to check it for you. NOTE: Refrigerator gasket replacement model is generally on the front and back of the refrigerator, in the refrigerator room

[Simple to Install] 1-To replace the freezer drawer gasket in your refrigerator open the freezer drawer. and pull the old drawer gasket free of the liner if still intact; 2-Fully remove the old gasket; 3-Before you install the new freezer drawer gasket you may need to Restore The Gasket Flatness; 4-Now, starting on a corner, insert the new gasket into the groove on the liner; 5-Keep in mind, you can use a hair dryer to help remove kinks from the material to ensure the freezer drawer seals properly.

[Compatibility of door gasket] CFHT1843LW9 CGTR1825SP0 CGTR1825SP1 CGTR1825SP2 CGTR1825SP3A CGTR1825SP4A FFHI1817LWA FFHI1817LWB FFHI1817LWC FFHI1826LWB FFHI1826LWC FFHI1831QP1 FFHI1831QP3 FFHI1831QP4 FFHI1831QP5 FFHI1831QP6 FFHT1814LWB FFHT1814LWC FFTR1821TW4 FFTR1821TWA FFTR1828SP0 FFTR1828SP1 FFTR1828SP4A FFTR1831QP0 FFTR1831QP1 253.60412413 253.60412415 253.60412610 253.60412612 253.60412613 253.60412614 253.60412617 253.60412618 253.6041261C 253.60419410 253.60419411 253.60419412 253.60419610 253.60419612 253.60419613 253.60419614...more compatibility, please check the product page.

[Strategies to solve the problem of magnetic strip does not work or not strong enough]1. Use a hair dryer on hot air against the layer of air bag in the center of the seal until the seal fits flat against the refrigerator; 2. If the door seal does not have good magnetic properties, pour some vegetable oil on a paper towel and apply it to the seal near the door hinge from top to bottom, then close the door. 3. Spread a thin coat of petroleum jelly along the sealing surface of the door gasket to help the new gasket seal properly. 4. Close the door and check the fit. The door gasket should fit tightly against the cabinet and door with no gaps showing.Then secure it with tape for 12 hours.

[NOTE-2] Smooth folds and creases in gasket 242193203 by these ways1.Fill a tub with some hot water and lay the gasket in it for up to 30 minutes. 2.Use a hair dryer (gentle wind) to heat up the rubber instead of water, or even place the gasket in a clothes dryer for 10 minutes. Heat is the key to removing the kinks without harming the gasket's integrity. 3.Lay the treated gasket on a table and carefully stretch the rubber into the shape you need for the freezer door, including a square or rectangular shape. Allow it to lay flat until you need to install it.