[Upgraded 241872512 Door Gasket] Our 241872512 Refrigerator Door Gasket is made of High quality EPDM rubber with precision welding process,1600 degrees fahrenheit high temperature welding. Featuring Cold resistence, high elasticity and flexibility, can quickly return to its original state after deformation.

[Great Sealing, Keep in Low-temperature ] Our frigidaire door gasket replacement 241872512 uses thicken magnetic strips, resistant to bending, strong suction for effective sealing and functions the same as original OEM-branded parts, but quality seal better than OEM. Perfect insulates the outside air and creates a low-temperature environment to keep your food fresh. You no longer need to worry about food being oxidized or contaminated, 241872512 frigidaire refrigerator door gasket (black) 241872512 door seal will guard the deliciousness for you.

[Perfect Refrigerator Gasket Replacement] Durability kenmore refrigerator door gasket seal 241872512 can perfect solve following problems: ➊Door gasket broken torn, worn ➋Moldy & dirty door gasket ➌Leaking / poor seal, temperature not staying cold. ➍Condensation builds up/ frost / ice build up inside. If this gasket is worn out, cold air will leak out of the freezer, forcing the freezer to work harder to cool down. As a result, the freezer may run longer than normal, or frost may accumulate inside of the freezer.

[241872512 Fridge Door Gaske Replace Part Numbers] 241872512 frigidaire refrigerator black door gasket can replace these part numbers: 240390704,240514612, 240542112, 240542124, 5304439526,1379488, AP4316031, PS1991436, AH1991436, EAP1991436. Luckman 241872512 refrigerator door gasket creates a seal around the door to prevent warm air from entering the freezer compartment, keep food inside the fridge fresh, stop the cold air leakage, avoid refrigerator freeze and water leaks.

[Specification of frigidaire door gasket 241872512] the 241872512 frigidaire refrigerator seals dimension is 42.1" x 28.9" ,Color: black. Measurement Method:Remove the refrigerator seal, measure the length and width between the outer diameter of the slots on the refrigerator door, and then measure the width of the slots to get the exact size of the seal.

【simple to Install】1-Make sure that the groove and its surrounding area are dry and clean before installing the unit, and then turn off the power. 2-Move down to the bottom corner. Then remove the freezer door,loosen the screws of the inner door liner and pull out the old gasket. 3-We need to use a hair dryer or heat gun to blow hot air to heat the surface of the freezer door gasket until the door gasket becomes soft,.Then place the new gasket evenly on the edge of the inner door liner.Secure it firmly by hand. 4-Tighten all screws and reinstall the freezer door.