NEW UPGRADED LOOK AND FUNCTION: Features a humane portable handle, fresh bright green color, and optimization of leakage defects. This innovative rain barrel pump is designed for pumping water from rain barrels or rain collection tanks.

EFFICIENT PERFORMANCE: 1/2 HP powerful motor provides a Maximum flow rate of 1050 GPH. This submersible pump has the ability to lift water up to Max 36 ft of vertical height, and its Max immersion depth is 23 ft, and can be used in Min 12"x12" pit.

AUTOMATIC MODE: The pump ON/OFF is controlled by float switch. Once the pump is plugged in, it will automatically start when the water level is above 15", and shut off when reaching the stop-level of 3". When you start to use this pump, tilt and submerge it into water for a few seconds to expel the air inside of the pump.

MANUAL OPERATION: If the water level is not high enough to start with auto mode or you want to remove water as lower as possible (0.2"), you can switch to manual control. Pump will keep continuously running and will not turn off automatically, so remember to cut off the power immediately to prevent the motor becoming burned.

SAFETY & RELIABLE: Full corrosion-resistant shell and environmental thermoplastic construction with thermal overload protection ensure safety and durability for household and utility applications. When the built-in thermal motor protector overheats, the sump pump will automatically switch off, and rework again after cooling down.

EASY TO USE & INSTALL: Comes with two aluminum extension tubes, an adjustable securing hook and a spray nozzle with flow control. Fits all standard garden hose connector systems. Adjustable telescopic tube for adjustment to the height of the rain barrel, and 26 ft cable and approved plug for wide range of use.

WIDELY USE: Ideal for pumping water from the water tank directly to water plants in the garden. It also can be used to drain water from tanks, ponds, pools, flooded areas, boats, etc. Pump works with CLEAN water which contains small solid less than 1/5".