RUST ENCAPSULATOR: Iron oxide is no match for our original Eastwood Rust Encapsulator. This paint-over-rust solution quickly stops surface rust before it can compromise the part’s structural integrity. Rust Encapsulator penetrates deep into the metal to prevent existing rust from spreading or future rust from forming. It’s also heat-resistant up to 350 degrees Fahrenheit, which means it can be safely used in the engine bay or near the brakes.

HOW TO USE: Apply product as a primer/Encapsulator over clean or corroded (rusted) steel or cast iron. Prep surface by mechanically cleaning loose flaking rust with a stiff brush or wire brush/wheel. Remove any grease, oils, or other surface contaminants with a solvent such as PRE or Acetone. Apply by brush, roller, or spray. See manual for more detailed instructions.

2X Stronger Than Original Rust Encapsulator

SAFETY INFORMATION: Always wear eye, skin and respiratory protection when applying this product. Use in a well ventilated area away from open flame. Store spray in a cool dry place. Warning: This product contains chemicals known to the State of California to cause cancer, birth defects or other reproductive harm.

WARRANTY: Comes with a 1-year limited warranty and 90 day return.