[Specification of W10830162 door seal] the W10830162 Whirl-pool refrigerator seals dimension is 39.7"x 16.93"; Package: 2 pcs W10830162 door gasket replacement; Measurement Method:Remove the refrigerator seal, measure the length and width between the outer diameter of the slots on the refrigerator door, and then measure the width of the slots to get the exact size of the seal. NOTE: On some model refrigerators this gasket is used only for the right door, and the left door uses a smaller gasket that requires a different part number. On some model refrigerators this gasket is used for the left and right doors. Please verify you are ordering the correct gasket before placing your order.

[Quality Upgraded Material] Whirl-pool W10830162 Door Gasket is made of High quality EPDM rubber with precision welding process,1600 degrees fahrenheit high temperature welding. Featuring Cold resistence, high elasticity and flexibility, can quickly return to its original state after deformation.

[Fit Perfect and Great Sealing] Thicken magnetic strips, resistant to bending, strong suction for effective sealing and functions the same as OEM-branded parts, but quality seal better than OEM. Perfect insulates the outside air and creates a low-temperature environment to keep your food fresh. You no longer need to worry about food being oxidized or contaminated, W10830162 fridge door gasket will guard the deliciousness for you.

[Repair Symptoms] Durability upgraded W10830162 refrigerator gasket replacement can perfect solve following problems: ➊Door gasket broken torn, worn ➋Dirty gasket ➌Leaking / poor seal ➍Condensation builds up/ frost / ice build up inside.

[Replace Part Numbers] Refrigerator door gasket seal replacement W10830162 replaces these parts: 12723206AP, W10179332, W10179332N, W10199876, W10443225, W10571956. please check you part number and model number before ordering. If you are unsure about the compatibility, you can send us your model number for verification.[NOTE] please measure your old gasket size carefully before ordering. Many door gaskets look the same but are not the same size, please order based on size rather its looks. Smooth folds and creases in gasket W10830162 by soaking it in warm water or warming it with a hair dryer on low heat.

[Compatibility of W10830162 Door Sealer] W10830162 refrigerator door seal replacement compatible with Whirl-pool, Ken-more, Kitchen-Aid, May-tag, Jenn-Air, Dacor. Fit model WRF535SWHZ, WRF535SMBM, KRFC300ESS, KRFF305ESS and WRF535SWHV, IX6HHEXDSM00, IX6HHEXDSM01, IX7HHEXDSM00, KBFS20EVMS13, KBFS22EWMS9, KRFC300ESS01, KRFF305ESS00, WRF535SMBM00..more compatibility, please check our product page. Before purchasing, check your device's model number to ensure compatibility.

[how To Remove The Kinks] 1. Fill a tub with some hot water and lay the gasket in it for up to 30 minutes. 2. Use a hair dryer to heat up the rubber instead of water, or even place the gasket in a clothes dryer for 10 minutes. Heat is the key to removing the kinks without harming the gasket's integrity. 3. Lay the treated gasket on a table and carefully stretch the rubber into the shape you need for the freezer door, including a square or rectangular shape. Allow it to lay flat until you need to install it.

[Refrigerator or Freezer Door Gasket Not Sealing?] 1. Use a hair dryer on hot air against the layer of air bag in the center of the seal until the seal fits flat against the refrigerator; 2. If the door seal does not have good magnetic properties, pour some vegetable oil on a paper towel and apply it to the seal near the door hinge from top to bottom, then close the door. 3. Spread a thin coat of petroleum jelly along the sealing surface of the door gasket to help the new gasket seal properly. 4. Close the door and check the fit. The door gasket should fit tightly against the cabinet and door with no gaps showing.Then secure it with tape for 12 hours.