RainFlo PC115A Automatic Pump Controller, 115V

Pay with

About RainFlo PC115A Automatic Pump Controller, 115V

The RainFlo PC115A provides automatic multifunction control for your water pump including start and stop control based on user demand (flow), demand-side pressure display via built-in pressure gauge in PSI and BAR, run-dry protection and a check valve (non-return valve) function. It provides direct control of water pumps up to 1.25 horsepower at 115V. The pump start pressure (low pressure threshold and start trigger), is adjustable through a screw on the back side of the unit. As with most pump controllers, the system high pressure is based on the pump output. The PC115A electronic controller commands the starting and stopping of single-phase electric water pumps whenever a tap or valve connected to the installation is opened or closed, respectively. When the pump is started, it keeps running as long as any connected tap remains open, supplying the network with the required flow at the related pressure. Power supply voltage: 1 115-125V Maximum current : 16 A Max pump power : 1100W (1.25 HP) at 1-115-125V Frequency : 50/60 Hz Protection class : IP 65 (*) Ambient temperature : 0 /+140° F Liquid temperature : 0 /+140° F Max flow rate : 44 GPM Adjustable starting pressure : 20 - 35 PSI Max operating pressure : 145 PSI