655 Bronze Round Bar, Unpolished (Mill) Finish, H04 Temper, ASTM B98, 0.3125" Diameter, 36" Length, OnlineMetals

Pay with

655 Bronze Round Bar, Unpolished (Mill) Finish, H04 Features

• 655 bronze, also called "Silicon Bronze", is strong, with good corrosion resistance, resilience, and good formability.

• 0.3125" Diameter, 36" Length

• H04

• Bronze 655 is typically used for marine hardware, fasteners, bushings, and shafts.

• Meets ASTM-B98

About 655 Bronze Round Bar, Unpolished (Mill) Finish, H04

The 655 bronze round rod with H04 temper is unpolished, meets American Society for Testing and Materials International ASTM B98 specifications, and has a standard tolerance. The 655 bronze alloy has high strength and corrosion resistance with better formability than 642 bronze due to its higher silicon content. The material has an H04 temper, meaning it has been cold worked to a hard temper. Copper, brass, and bronze are known as red metals because they contain copper, which has a reddish color. Copper, a term that applies to alloys containing at least 99.3% copper, offers very high thermal and electrical conductivity and provides corrosion resistance, formability, and machinability. Brass is an alloy of copper and varying levels of zinc, sometimes with additional elements. It provides greater strength and better machinability than copper or bronze. Bronze is commonly an alloy of copper and tin, but sometimes it is copper alloyed with other elements such as aluminum, phosphorus, manganese, or silicon. Tin gives bronze more corrosion resistance than brass and greater strength than copper. Copper and its alloys have temper designations, meaning the material has undergone a process to achieve certain properties of strength and hardness. Tensile strength, used to indicate the material's overall strength, is the peak stress it can withstand before it breaks. Corrosion resistance describes the material's ability to prevent deterioration caused by atmosphere, moisture, or other medium. Wear resistance indicates the ability to prevent surface damage caused by contact with other surfaces. Hardness (commonly measured as indentation hardness) describes its resistance to permanent surface deformation. Formability indicates how easily the material can be permanently shaped. Machinability describes how easily it can be cut, shaped, finished, or otherwise machined, while weldability characterizes the ability to be welded.