Leepesx ABS Mini Static Grass Flocking Applicator with Antiskid Handle for DIY Scenic Modelling Sand Table

Pay with

About Leepesx ABS Mini Static Grass Flocking Applicator

is with low power dissipation and high voltage output, makes this flocking machine quite b flocking capacity. Specially design for flocking in small area, sand table construction model, and other DIY scenes. You can have a try. Using Steps: Charge the battery before using and check if the wire inside the container is in contact with the wire mesh. This is the pitch control button. Put in the grass powder. It has been suggested that the length of the grass powder is more than 5 mm, which is more effective. Then tighten the lid. On the target model and on the table, pull out the white latex and spread it evenly, ready to start dusting with grass powder. Touch the target surface of the platform with the negative electrical connector as close as possible, then use the seeder grass to start spraying the grass powder 2-3 cm away from the platform target. After the grass dust is completed, pour the grass powder or powder supplement and blot it with a vacuum cleaner model. Cut the haystack with small scissors and a toothpick until it grows evenly. Note: Do not use the negative terminal to contact them with the wire mesh, there is a danger caused by sparks! Use limit of more than 16 years old! Remove the battery and place it high when not in use. Static grass original screen applicator is suitable for 3-5mmstatic Grass. Powered by 2 * AA battery, you should prepare it by your self. Specifications: Name: Static Grass Flocking Applicator Set Material: ABS Battery: 2 * AA battery (excluded) Rated working voltage: DC 3V Rated working power: 0.15W Rated output voltage: ?DC3000V Rated working current: 50mA Package size: 320 * 120 * 120mm / 12.60 * 4.72 * 4.72in Package weight: 245g / 8.64ounce Package list: 1 * Brush 1 * Static Grass 1 * Static Grass Applicator