Geekworm Jetson Nano 18650 UPS (5.1V Max. 8A Output) & Power Management Expansion Board T200 Shield for NVIDIA Jetson Nano Developer Kit (Only T200 Shield)

Pay with

About Geekworm Jetson Nano 18650 UPS

Overview NVIDIA Jetson Nano 18650 UPS HAT Shield, T200 Power Management Board is a 18650 UPS HAT shield for NVIDIA Jetson Nano Developer Kit, it provides smart and powerful uninterruptible power supply and Safe power management for Jetson Nano. T200 Key Features UPS Function Smart and powerful Uninterruptible Power Supply (UPS) Provides continuous operations for up to 10~30hours (depending on battery type and qty used) Max 5.1V 8000mA Power Backup for even the most demanding Jetson Nano set ups 18650 four Cells Lithium Ion Holder, Can work with two or three or four 18650 Lithium Ion batteries Supports 2A via micro-USB socket or 3A via DC jack fast charging Safe power management On-board push button to control power on /off (Press-ON, Hold the button pressed at least 3s -OFF) Automatic powering off when system shutdown On-board pin header to enable auto power-on when power supplied or battery installed Ultra-low standby power consumption of μA to maximize battery life Operate in both charge mode and boost mode to allow full system management and battery power management WIKI for Reference raspberrypiwiki.com/index.php/T200 Power Supply Power supply via Micro-USB socket: 4.7~5.5Vdc, 2.5A; Via DC power jack: 4.7~5.5Vdc ±5%, ≥4A UPS output : 5.1V ±5% Max 8A UPS charging current: 2A via Micro-USB socket, 3A via DC jack Terminal Battery Voltage : 4.2V Recharge Threshold : 4.1V T200 Packing List 1 x T200 18650 UPS&Power management Board 1 x DC 55*21 cable Male to Male 15cm 1 x USB 3.0 A-Male to A-Male Data cable 2 x Jumper Cap 1 x Screws Pack Note: The Jetson Nano, T200-A1 board and 18650 batteries are all not included in the packing list