HANGKAI 6HP 2 Stroke Heavy Duty Outboard Motor Boat Engine with Water Cooling System

Pay with

About HANGKAI 6HP 2 Stroke Heavy Duty Outboard Motor Boat

Notice:  Please add gear oil to the gears before use the motor and replace gear oil after the run-in period (10 hours). (If you do not know how to handle this, please contact with us.) Cylinder Scoring is a serious damage,which caused by improper use and will cost you a lot of money to repair the motor. Don't do the following will avoid cylinder Scoring: 1. start the motor on the shore 2. use the motor when it stop coming out of water Even if you want test the motor, it should be done in the river! When there is About certification: We can only provide CE certification, there is no other certification can be provided,thanks for your understanding. Technical Parameters: Dimension Overall length 1040mm(40.9 in) Overall width 872mm(34.3 in) Overall height 332mm(13.1 in) Transom height 44CM(17.3 in) Performance: Full throttle operating range 5000-6000r/min Maximum output 4.4KW/6HP Idling speed ( in neutral) 1000±100 r/min Engine Gear positions Forward-neutral-reverse Gear ratio 2.15(28/13) Trim and tilt system: Manual tilt Drive unit Recommended fuel Regular unleaded gasoline Integral fuel tank capacity 2.5L Recommended engine oil 2-stroke outboard motor oil Engine oil type Genuine or recommended 2str engine oil Lubrication System Engine oil mixed gasoline Engine oil mixing ratio Fuel 50: Engine oil 1 Gear oil quantity 195ml(6.6 fl.oz.) Tightening torque for engine Spark plug 25.0Nm(18.4 ft-lb) (2.55 kgf-m) Engine oil drain bolt 18.0Nm(13.3 ft-lb) (1.84 kgf-m) Short shaft: 40cm