New PWM to Voltage PWM 0-100% to 0-5v 0-10v Linear Conversion Transmitter Module

Pay with

New PWM to Voltage PWM 0-100% to 0-5v 0-10v Linear Features

• the working voltage : 9V ~ 17V

• the input voltage range : 4 ~ 24V

• the input frequency range : 50Hz ~ 10KHz

• the input duty cycle range : 0 to 100%

• the output voltage : 0.00V ~ 5.00V/0.00V ~ 10.00V

About New PWM To Voltage PWM 0-100% To 0-5v 0-10v Linear

This is a linear conversion module, processing by the internal chip, PWM output data expressed by voltage signal. Module parameters 1, the working voltage : 9V ~ 17V 2, the input voltage range : 4 ~ 24V 3, the input frequency range : 50Hz ~ 10KHz 4, the input duty cycle range : 0 to 100% 5 , the output voltage : 0.00V ~ 5.00V/0.00V ~ 10.00V 6, the input mode : J1 pad on the board : The default is open, not yet used to . 7 , output : J2 pads on the circuit board : open ( output 0.00V ~ 5.00V); shorted ( output 0.00V ~ 10.00V), the default is open. 8 , Applications: Remote data acquisition and control equipment ; 9 , Size: (L ) 26mm * ( W ) 23mm * ( height ) 10mm Module interfaces: 12V: power supply positive interfaces (9V ~ 17V). G: Power to the ground interface . IN: signal input positive interface. G: signal input negative interface. OUT: Signal output interface(0.00V ~ 5.00V/0.00V ~ 10.00V). G: Power to the ground interface . Note : When the output 0.00V ~ 10.00V, power supply voltage to 15 volts . Output (0.00V ~ 5.00V) Resolution : 0.050V / D ( V / per duty cycle ) Output (0.00V ~ 10.00V) Resolution : 0.100V / D ( V / per duty cycle ) Measured duty cycle calculation formula: ( the output voltage (V) / resolution ) = duty cycle ( % ) . For example: output (0.00V ~ 5.00V) 2.5V output (2.5 (V) / 0.05) = 50 (%). Package include: 1 x New PWM to Voltage PWM 0-100% to 0-5v 0-10v Linear Conversion Transmitter Module