All Categories
These taps are made from bearing steel for high hardness.
There are 7 different sizes of tap from M3 to M12 that can be used for tapping various threads.
They are used to cut new threads or repair damaged threads.
These taps are used with a tap wrench to do the tapping.
Great tools to create screw threads on wood, plastic, aluminum or many other soft materials.
Specifications: Type Size: (Thread*Pitch) M3: 3mm*0.5mm M4: 4mm*0.7mm M5: 5mm*0.8mm M6: 6mm*1mm M8: 8mm*1.25 mm M10: 8mm*1.5 mm M12: 8mm*1.75 mm Material: Bearing Steel Instructions: 1. Insert cone part first and make sure the tap center line agrees with drilling center line. 2. Rotate tap wrench with a even force to feed tap, don't need to add force after feed. 3. Reverse rotate about 45 ° each time rotate tap to cut chip in order to avoid blocking. 4. If it is difficult to rotate tap, stop adding force or tap will be broken. Note: the hand tap does not support the machine. Please pay attention when using it.Tap with tap wrench.