RS232 Inclinometer, Horizontal Mount, Dual Axis, ±90° Range, 12ft DB9 Cable with 5V Power Adapter

Pay with

About RS232 Inclinometer, Horizontal Mount, Dual

DB9 serial communication does not use all 9 pins when using with RS232 communication. Therefore, this DB9 cable utilizes unused pins in order to provide a simple connection to a DC wall adapter. This package includes a 5VDC adapter, but it is compatible with other DC regulated wall adapters within the inclinometer's input voltage range of 4-40VDC. Simple installation comes standard. We've taken the confusion out of installing an inclinometer. Our simple installation process has eliminated the headache of adjusting trim pots, adjustment nuts, or rotating while holding a voltmeter. Keeping it simple saves everyone valuable time and money. 2GIG's inclinometer comes standard with a stainless steel button that illuminates in blue. The button illuminates when the unit is powered on. In order to set a relative zero after mounting the inclinometer, press and hold this button for 3 seconds until all LEDs flash two times. To reset the inclinometer back to factory-calibrated zero, hold the button for 6 seconds and all LEDs will flash four times. The bright red trip LED is also another standard feature. The highly visible illumination around the perimeter of the top cover provides you with the best visibility to see if the LED is on. This LED is preset to illuminate when the tilt sensor reaches its max degree range.