Armor Fine Non Slip Additive for Slip Resistant Acrylic Sealers, Epoxy Coatings, and Urethane Coatings - for Up to 5 Gallons

Pay with

Armor Fine Non Slip Additive for Slip Resistant Features

• 16 OZ container will be enough for up to 5 gallons.

• Can be added to solvent based acrylic sealers, water or solvent based epoxies and urethanes.

• Will help to add more surface traction, and reduce surface slipperiness

• Easy to apply with a handheld broadcast spreader.

About Armor Fine Non Slip Additive For Slip Resistant

The Armor Fine Non-Slip additive is a great additive for surfaces where a little extra surface traction is desired. For surfaces consistently wet with water, or surfaces where the maximum added surface traction is required, consider instead the Armor Course Non-Slip additive. For best results, apply the Armor non-slip additive with an appropriate hand-held broadcast spreader. When applying the second coat, add the non-slip additive to the coating using a broadcast spreader, and back roll to encapsulate the non-slip additive. You will apply roughly 3 OZ of non-slip for every gallon of sealer.