All Categories
Precision machined unibody casing from premium grade aluminum bar stocks
Durable natural hard anodized finish (Type III Class I)
Smart user interface provides fast and easy access to all brightness levels and beacon-strobes.
Proprietary heat sinking design bonds the LED board directly to the unibody aluminum casing
Waterproof to IPX8 (2 meters, 30 minutes)
Cree XP-L2 EasyWhite LED. Nominal CCT: 4500K, Minimum CRI: 80, Tint deviation: 3-Step. User Selectable Levels: 3 main levels (High, Medium and Low). Each main level can be programmed to one of its two sub-levels. The second sub-level of the each main levels can be further programmed to different brightness levels. Light Output (runtimes) - High: H1 330 Lm (0.9 hr) or H2 275 Lm (1.6 hr) / 198 Lm (2.3 hrs) / 122 Lm (4.2 hrs), Medium: M1 65 Lm (8.5 hrs) or M2 30 Lm (21 hrs) / 12 Lm (41 hrs) / 4.1 Lm (4.5 days), Low: L1 1.2 Lm (13 days) or L2 0.31 Lm (1.1 month) / 0.07 Lm (2.2 months) / 0.013 Lm (3.3 months), Beacon Strobe Mode: 0.2Hz Beacon at Low / 0.2Hz Beacon at H1 / 4Hz Strobe at H1 / 19Hz Strobe at H1. Light output are ANSI out the front (OTF) values. Runtimes tested (and parasitic drain estimated) using Panasonic Eneloop Pro AA batteries. Remaining battery power, about 10-20%, after step-down are not counted towards the runtimes. Operating Voltage Range: 0.7V - 2.0V. Battery: One AA size NiMH, lithium or alkaline battery. Panasonic Eneloop or Eneloop Pro is highly recommended. Batteries are not included in the box. Parasitic Drain: Negligible (much less than the self discharging of a battery). Beam Type: 80 degree spill, 12 degree hot spot. Dimensions - Head Diameter: 0.86 inch (21.8 mm), Length: 2.9 inch (75 mm). Weight: 1.1 oz (31 gram), 2.0 oz (56 gram) with an Eneloop AA battery, 2.8 oz (79 gram) with an Eneloop AA battery and headband. Battery capacity indicator (LED flashes 1-4 times, 4 short clicks to start). All levels are current regulated. Automatic stepping down from High to Medium, and from Medium to Low when battery capacity is low. Durable electronic soft-touch switch. Battery power can be disconnected by slightly unscrewing the tailcap to prevent unwanted activations or parasitic drain. Sealed and potted LED driver circuitry. Battery reverse polarity protection. Tempered optical grade glass. Orange peel reflector.