X
Category:
Plumbing
Avanti Membrane Technology Drinking Water Faucet
Avanti Membrane Technology Drinking Water Faucet
Avanti Membrane Technology Drinking Water Faucet
Avanti Membrane Technology Drinking Water Faucet
Avanti Membrane Technology Drinking Water Faucet
Avanti Membrane Technology Drinking Water Faucet

Avanti Membrane Technology Drinking Water Faucet Connector - 3/8" tube OD x 7/16"-24 UNS, quick-connect fitting & thread - QF-FF06

Product ID : 30463921
4.6 out of 5 stars


Galleon Product ID 30463921
UPC / ISBN 731882649604
Shipping Weight 0.05 lbs
I think this is wrong?
Model QF-FF06
Manufacturer Avanti Membrane Technology
Shipping Dimension 2.8 x 2.72 x 0.71 inches
I think this is wrong?
-
Product is Out of Stock as of Feb, 20 2024
Want to monitor availability?
of brand new stock?
or
Need this item ASAP?
Check if this is available on Amazon
or available in other sites
Send us the link so we can buy for you

Pay with

About Avanti Membrane Technology Drinking Water Faucet

Description " Applications · Reverse Osmosis Systems · Drinking Water Filtration Systems · Water Coolers · Coffee Machines · RVs · Misting Systems · Point-of-Use Filtration Systems · Beverage Dispensers · Ice Makers Food-Grade Quality · Our fittings are produced with food-grade material and can be used in food and drinking water applications Portable Water Applications · Our fittings are suitable for potable water applications with a maximum chlorine concentrate of 4 ppm · Direct exposure to sunlight will reduce fittings service life and may lead to failure · All fittings and tubing should not be used near heart emitting appliances · For cold water applications only Technical Specifications · Body: made of food-grade Polyacetal and Polyoxy Methylene · O-ring: Nitrile (NBR) · Collet: Polyoxy Methylene and stainless steel · Working Pressure and temperature Range: Maximum 150 psi @ 70°F (10.3 bar @ 21°C) / 60 psi @ 140°F (4.1 bar @ 60°C); Minimum 33°F (1°C) Installation and Testing · Fittings and tubing installations should be inspected by pushing and pulling on the connection points and be pressure-tested prior putting into service · Fittings should not be exposed to excessive side loads and caution should be taken to prevent undue stress and excessive side loading "