Alwd Training Wheels for 12 14 16 18 20Inch Bicycle,Kids Bike Stabilizer

Pay with

About Alwd Training Wheels For 12 14 16 18 20Inch

ADULT ASSEMBLY ERQUIRED TOOLS REQUIRED :Socket Wrench，Adjust Wrench and PliersASSEMBLY  INSTRUCTION:（AS P3 SHOWES）1. Use the bracket Arm insert 1# washer and the wheel hole ,and then through the 2# washer2. lock nut and tighten ,make sure that the wheel can turn it freedom.3. Cover the black cap ,if the cap cant cover,pls adjust the nuts.4. Repeat step 1-3 on the second wheel bracket  INSTALLATION INSTRUCTIONS(AS P6 SHOW)1. Remove nut and any washers (depending on bike model-see bike assembly instructions for details )2. Attach the provided spacer to the rear axle 3. Place stabilizer bracket onto axle 4. Put the long pad luck on the bracket .5. Determine desired height of the training wheels to find proper hole to use on the wheel bracket.when attached ,the training wheels should have about 1/4 -3/8inch clearance from the ground .6. Place the wheel bracket hole that corresponds to desired height onto rear axle.the stabilizer bracket should interlock with wheel bracket fitting firmly together .7. Attach bike's original lock nut and tightenRepeat steps 1-6 on the opposite side of the bike.