Evan Designs 9 Volt Battery Strap with ON / Off Push Button Switch (1 Single)

Pay with

About Evan Designs 9 Volt Battery Strap With ON / Off

9 Volt Battery Strap with Integrated ON / OFF Push Button Switch This battery strap harness has a hard shell, i-type connector, and a durable push button on/off switch with a firm, audible click. The switch is rated to 1 Amp. Dimensions: The wires are 12 inches long. The switch is located 8 inches from the battery snap. The switch is 0.45” (12mm) long, 0.30” (8mm) wide, and 0.35” (9mm) tall. The connector is 0.90" (23mm) long, 0.50" (13mm) wide, and will sit about 0.35" (9mm) above the flat edge of the top of the battery when clipped in place. Great for: Any of our pre-wired, 9 volt LED lights, police sirens, and other LED circuits Arduino circuits Breadboard circuits Home or school science projects Any other DIY projects or repairs that you want to run on a 9 volt battery The heavy duty pushbutton switch can be located in a convenient (or a discrete) location on your project. A standard 500mA 9 volt battery can power 50 of our 9 volt LEDs for 4.5 hours, or 3 LEDs for 36 hours. Note: There is not a resistor built into this battery strap. The two power leads will output 9 volts. If you are going to connect LEDs to this battery strap, make sure they have the proper resistors, so they can run on 9 volts without burning out. 100% Satisfaction Guaranteed! If you have any issues, please contact us so we can make it right! We offer a 2 year manufacturer's guarantee on all of our products!