Wolfwhoop Q3-Pro-US 5.8GHz 0.01/25/200/500/1000mW 40CH Switchable FPV Video Transmitter with MMCX to SMA Female and Integrated FC Uart Support VTX Settings in Betaflight OSD (Q3-Pro-US)

Pay with

Wolfwhoop Q3-Pro-US 5.8GHz 0.01/25/200/500/1000mW Features

• This Q3-Pro-US is US Version for Q3-Pro (1000mw)

• Dimensions : 36mmX36mm (WXD), Perfect match for FC, like F4/f4-Pro/F3

• Traditional button+ nixie tube display control of frequency and power

• 0.01mW to prevent adjacent channel interference, Integrated Uart, connectable to betaflight FC

• Support parameter remotely adjusted by Betaflight, flight controller, OSD, Compatible with betaflight 3.2 3.3 3.4 3.5 or higher version

About Wolfwhoop Q3-Pro-US 5.8GHz 0.01/25/200/500/1000mW

This VTX is that you can mount it on top of your FC/PDB stack thanks to the 30x30mm mounting pattern like OMNIBUSF4 and OMNIBUSF4 Pro. MMCX has more mating cycles and is more robust. Feartures: With MIC 5V output for camera 2S-6S input power supported LC filter allows ultra clean fpv video 0.01/25/200/500/1000mW Switchable Integrated with Uart, connectable to betaflight FC (Support FC like Wolfwhoop Whoop-Tower/OmnibusF4 Pro) Support parameter remotely adjusted by Betaflight, flight controller, OSD 5V BEC output, support power for receiver and camera Specifications: Operating Voltage: 7 - 24V Power supply: 5V camera@under 0.5A max Output power: 25mw/200mw/500mw/1000mw Range: Up to 6-8km with omnidirectional RHCP antennas Antenna connector: MMCX Video Format: NTSC/PAL Port connector: JST,6pin Dimensions: 36(W)x36(D)mm, 30.5x30.5mm(hole) Weight:9.6g(excluding antenna) The vtx can power up 5V camera @ under 300mANote : 5645/5925/5945(E4/E7/E8) are not available sue to FCC regulation. Selecting 5645/5925/5945(E4/E7/E8) will be invalid action. 37 channels are all above 5650 and below 5925MHz, which are legal to use in the USA with an amateur radio license. This equipment is being sold under FCC's amateur radio rules. Operators must require amateur radio license to operator legally in the US. Use of amateur equipment without a license or use of equipment on restricted frequencies could subject the operator to significant fines by the FCC. By purchasing this equipment, the user is agreeing that they understand these responsibilities and will operate the equipment legally. More information related to ARL, please go to http://www.arrl.org/getting-licensed.