X

Rollerhouse DIY Electric Roller Blind/Shade Tubular Motor Kit, Hard Wired 12V DC Motors 2 Wire Motor, No Radio for RV Electric Roller Shade, Fits 1-3/16" Shade Tube

Product ID : 31707679


Galleon Product ID 31707679
Model
Manufacturer
Shipping Dimension Unknown Dimensions
I think this is wrong?
-
5,121

*Price and Stocks may change without prior notice
*Packaging of actual item may differ from photo shown

Pay with

About Rollerhouse DIY Electric Roller Blind/Shade Tubular

Product Specifications -control type: no radio, can use any receiver controller, or Hard-Wired Switches Controls -lift capacity with standard adapters: 6.6lb lift (3 Kg) with 1.18" O.D. tube -nominal voltage: 12 v DC (safe for children and adults) -minimum voltage: 9.5 v DC -max turns in one direction: unlimited -upper/lower limits: 'learning type', set by controller positioning -noise level: 36db -Temp Working Range: 32°F to 140°F (0°C to 60°C) -Supply cable type(m㎡) 2x0.20 -Supply cable length with 2 meter Please note with some Application --25mm roller shades motor can be controlled without remote by switching polarity of power supply --Applying +/- power makes it go in one direction and -/+ power makes it go in the other direction --12-volt motorized RV shade can connect with a dual switch motor --Switch motor shades are used for Windshield shades in RV motorhomes as they will link to switches in your dash --Switch-operated shades require the switch to be held until the shade either reaches its limit or the desired intermediate position (the shade can be stopped at any point by simply releasing the switch --With wired shades, a separate line is run to each shade connecting it to a central control system, Examples of hardwired home automation systems include C-Bus or simple switches --Home Automation: Vera Controller + Qubino Flush Shutter, without the remote and it works with Z-Wave Controller -- Low Voltage hard wired DC 12V Motor Systems can be work with home automation solutions via smart devices as well when used with a network hub, eg. RF control or hard-wired switched --Roller & Screen Shades of various roller tube sizes, this one is suit for 1 1/10" (28mm)ID roller tube, please confirm your Aluminum tube first or message to us if need some more support before buying