We specialize in hard to find items
All Categories
PHROZEN 3D Printer Rapid Aqua Blue Resin, 405nm LCD UV-Curing 500g Resin for Low Shrinkage and High Precision Printing
Share Tweet
About PHROZEN 3D Printer Rapid Aqua Blue Resin, 405nm LCD
Specification Weight: 500g per bottle XY Resolution: 50 µm Recommended Layer Height: 30-100 um Way to Rinse: Clean with alcohol spray with air gun. DO NOT immerse model into alcohol for long time. Key Performance: Viscosity: 125 cps Proportion: 1.1 Tg：80 °C Elongation: 21 % Break value: 24 MPa Surface hardness: Shore 86D I-Zod Impact：1.81 KJ/m2 Precautions Use and preserve resins in room temperature, dark, and ventilated condition. Shake well before use. When print finishes, keep used resins in closed & opaque bottle. Avoid mixing used resin with a fresh one. Keep resin away from kids and away from direct sunlight exposure. Wear gloves and masks during operation of resins. Wash with plenty of water if you get direct skin contact or eye contact with resins. DO NOT dump resin. Please cured it and treat it as general plastic garbage.
