Leviton ODS10-IDI Decora 120/277V Wall Switch Occupancy Sensor, Ivory

Pay with

Leviton ODS10-IDI Decora 120/277V Wall Switch Features

• Leviton 1-Pole Commercial Grade Occupancy Sensor Wall Switch, Passive Infrared, 120 / 277 Volts

• Convenient push-button provides manual on/off light switching at any time

• 180-degree field of view provides approximately 2,100 square feet of coverage

• Segmented Fresnel lens provides optimum sensitivity and performance

• Horizontal field of view may be adjusted between 180 degrees and 32 degrees of arc

• Ambient light override can be set to prevent activation if sufficient ambient light is available

• Leviton offers a wide selection of motion sensors that use passive infrared, ultrasonic or a combined multi-sensing technology

About Leviton ODS10-IDI Decora 120/277V Wall Switch

Product Description Product Features Product Line: ODS10 Technology: Passive Infrared Switch Type: Single-Pole Mounting: Wall Switch Device Type: Occupancy Sensor Grade: Commercial Coverage (Sq.Ft.): 2100 Sq. Ft. Pattern: 180° Mounting Height (Ft.): 4 Ft. Adjustment: Manual Time Delay: 30s-30m Voltage: 120/277 Volt AC 60Hz Load Rating: 800W@120V INC 1200VA@120V 2700VA@277V FL Motor: 1/4 HP @ 120V Power Pack: External Power Pack Not Required Consumption (mA): N/A Photocell: Internal HVAC Relay: N/A Operating Temperature: 0°C to 50°C Storage Temperature Range: -10°C to 85°C Relative Humidity: 20% to 90% non-condensing Neutral Wire Connection: Not Required Color: Ivory LED Color: Red Wallplate Not Included Standards and Certifications: UL/cUL Code Compliance: California Title 24 Size: 4.06" H x 1.75" W x 1.85" D (103.2mm x 44.4mm x 47.2mm) Warranty: 5-Year Limited. From the Manufacturer Leviton's ODS10-ID Decora (R) wall switch passive infrared (PIR) occupancy sensor is used to provide automatic lighting control for energy savings and convenience in a variety of commercial applications, including: class rooms - conference rooms - offices multimedia rooms - day care centers - lounges the ODS0D- ID provides automatic switching of two separate incandescent lamps and fluorescent and low-voltage lighting with electronic or magnetic ballasts. The unit also features a manual override switch that can be used to keep lights off while an area is occupied, which may be desired in conference rooms and other areas during slide or film presentations. The unit installs in place of a single-pole wall switch and fits in a standard wall box. The unit requires a ground connection. Decora passive infrared wall switch occupancy sensor, 180-degree, 2100 sq. ft. coverage, commercial grade - ivory. Wall Plate not included with Occupancy Sensors. Decora is a registered trademark of Leviton Mfg. Co., Inc.