SKF 23192 CA/C3W33 Spherical Radial Bearing, Straight Bore, Lubrication Groove, 3 Hole Outer Ring, Brass Cage, C3 Clearance, 460mm Bore, 760mm OD, 240mm Width

Pay with

SKF 23192 CA/C3W33 Spherical Radial Features

• Axially symmetric races to support radial loads while maintaining high speeds and rotational accuracy

• Straight bore fits conventional cylindrical shafts

• C3 radial internal clearance for radial slack between the inner and outer rings is greater than CN (normal) to compensate for thermal expansion

• Brass cage evenly spaces the rollers for even load distribution and prevents contact to reduce friction, vibrations, and noise

• Three lubrication holes in the outer ring for lubrication in place

About SKF 23192 CA/C3W33 Spherical Radial

The SKF spherical radial bearing has symmetric races to support radial loads while maintaining high speeds and rotational accuracy. It has a straight bore that fits conventional cylindrical shafts, and it has a C3 radial internal clearance for radial slack between the inner and outer rings that is greater than CN (normal) to compensate for thermal expansion. Its brass cage evenly spaces the rollers for even load distribution and prevents contact to reduce friction, vibrations, and noise, and extending the life of the bearing. This radial ball bearing is suitable for use in general purpose applications that primarily involve radial loads and minimal axial loads at relatively high rotational speeds. These include transmissions, motors, and pumps, among others. Specifications Main bearing dimensions ISO 104:2002 Basic dynamic load ratings DIN ISO 281 Dimensional and geometric tolerances ISO 199:1997, tolerance class PN Through-hardening steel for inner and outer rings and rollers ISO 683-17 Pressed sheet steel for cage (DIN) EN 10111:1998 Load carrying capacity and life ISO 281:1990 System for creating part numbers for rolling bearings DIN 623-1 Rolling bearings use rolling elements to maintain the separation between moving parts to reduce rotational friction and support radial and axial loads. These elements can be one of the following types: ball, cylindrical, spherical, barrel, needle, spindle, or tapered. All rolling bearings are open, shielded, or sealed. Sealed bearings are lubricated with oil or grease in the bearing factory, while open and shielded bearings are meant to be lubricated in place, with periodic reapplication of lubrication, based on use. The shield protects the working parts of the bearing from environmental debris that may be introduced and could reduce the ball bearing speed and lifespan. Rolling bearings are used in a range of applications from agricultural machinery to conveying equipment, robotics, dental equipment, elevators, rolling mills, ship rudder shafts, and aggregate crushers, among others. SKF Group manufactures bearings and units, seals, mechatronics, and lubrication systems that meet International Organization for Standardization (ISO) 14001 and 9001, and Occupational Health and Safety Assessment Series (OHSAS) 18001 standards for quality assurance. The company, founded in 1907, is headquartered in Göteborg, Sweden.