RATTMMOTOR 3 Axis USB CNC Controller Kit,Nema23 Stepper Motor 425oz-in 3A 112mm,FMD2740C Driver 4A,USB Interface Card USBCNC Control Breakout Board,36V Power Supply CNC Router Machine Kit

Pay with

RATTMMOTOR 3 Axis USB CNC Controller Kit,Nema23 Features

• 23HS2430B Nema23 Stepper Motor: Phase: 2 Phase; Type: Hybrid; Step Angle: 1.8degree; Current: 3.0A; Holding torque: 425oz-in 280Ncm; Shaft: Dual Shaft; Shat diameter: 8mm; 4 Lead Wires; Wirings: A+ to Red / A- to Green / B+ to Yellow / B- to Blue Motor Size: 57x57x112mm

• FMD2740C Driver: Input Voltage: DC18-50V; Current: 1.4A-5.6A;Subdivision precision: 400,800,1600,3200,6400,12800,25600,1000,2000,4000,5000,8000,10000,20000 and 25000 optional

• 400W 36V 11A DC switching power supply: Please flip the side input voltage selector switch to choose the input power supply,support input voltage : AC110V-120V or AC220V-240V

• 4 Axis USB CNC Breakout Board: Card input voltage: 15-36VDC; With remote hand control; Support computer system: Support Win XP/7/8/10 system; USB port,only support USBCNC Software,with a CD,you can download the manual,USBCNC software and registration code; Support limit switch; 0-10V speed control signal,external pause and reset interface etc

• Feature of the controller board: X/Y/Z/A axis stepper motor control signal output, the definition is CK+CK-DIR+DIR-;Manual speed control interface (GND,JOG,VCC);Limit input interface;Spindle control output;MIST/FLOOD/SPINDLE control relay output;External pause and reset interface

About RATTMMOTOR 3 Axis USB CNC Controller Kit,Nema23

package include:   3 x 23HS2430B Nema stepper motor 425oz-in 112mm 3A (Dual Shaft) 3 x FMD2740C stepper motor driver 1 x 400W 36V/9.7A switching power supply 1 x 4 Axis USBCNC breakout board 1 x Hand controller  1 x USB Cable CD include with English user manual and software and register code  Ps:This cnc kit only support USB CNC Software,not support Mach3 Software,when install the software need the right register key to run pls contact for it! 1.  USBCNC breakout board 2) Computer system requirement       Minimum configuration: 1) CPU:1GHz 2) Memory: 512MB 3) 500MB free disk space 2. FMD2740C stepper motor driver 2,Features 1. Power supply voltage 12 to 40VDC                  2. Subdivision precision 2\8\16\32\64\128\10\20 optional   3.Maximum drive current is 4A 4.Drive any 4A phase current of 2-phase or 4-phase hybrid stepping motor              Applications Suitable for a variety of small and medium-sized automation equipment and instruments,for example: Small engraving machine, SMT machine, etc. Strengths connection port SignalFunction VIN+12to50 v dc power supply input +end,it is recommended to use 36V3A 3. Stepper Motor General Specification: Step angle accuracy:+ -  5%(full step,not load) Resistance accuracy: + - 10% Inductance accuracy:+ - 20% Ambient temperature ----------—20deg  ----  +50deg Datasheet(23HS2430B,Front shaft 8mm dia and 21mm length;back shaft 8mm dia and 11mm length,425 oz-in or 28kg.cm holding torque) 4.Switching power supply 400W,Input:100-120VAC or 200-240VAC,50/60Hz,Output:36v/9.7 A,single output switching power supply