VFD CNC Spindle Motor Kits：220V 2.2KW CNC VFD+220V 2.2KW 4bearings 400hz 24000rpm Φ80mm Water Cooled Spindle Motor+220V 75W Water Pump+80mm Motor Clamp Mount+5m Water Pipe (Factory Direct Sales)

Pay with

VFD CNC Spindle Motor Kits：220V 2.2KW CNC Features

• 【Connection way】The package only supports 220VAC(+/-5%) 1/3 phase voltage input, the input wire is connected to the R and S terminals of the VFD, and the output wire is connected to the UVW terminal of the motor（pin1=U,pin2=V,pin3=W,pin4=ground）

• 【Parameter Settings】All parameters have been set up, the customer can directly connect and start when receiving the product

• 【Package Include】1 x 220V-2.2KW VFD, 1 x2.2KW Φ80mm 24000RPM ER20 Spindle.1 x 220V-75W Water Pump ,1 x 80mm motor clamp,1 x 5m Water Pipe.

• 【Wide range of applications】The spindle motor applied to: wood carving/engraving machine, advertisement engraving machine,CNC machine, small sized processing center, high speed centrifuge etc.

• 【Warranty】1 Year discount replace (The spindle is half a year). If there is an error code in the product and you do not know how to operate, please contact the seller

About VFD CNC Spindle Motor Kits：220V 2.2KW CNC

This package includes：●1 x 220V-2.2KW VFD●1 x 220V-2.2KW ER20 4bearings Φ80mm Water Cooled Spindle Motor(with a 6mm collet)●1 x 220V-75W Water Pump●1 x 80mm Motor clamp mount●1 x 5m Water Pipe.VFD specification:modle:HY02D223Bpower:2.2KWhorsepower:3HPInput voltage：single-phase or three-phase 220V + -15% 50Hz / 60HzOutput voltage：220V three-phaseMaximum output frequency:0 to 400hzInput Frequency: 47-63Hzthe VFD can work with 220V single phase input and 220V three phase input.you can just connected L1/L2 to any two of VFD input R/S/Tspindle motor specification:●Material: The cover is made of stainless steel, and the water jacket is high compression casting aluminum tube, red copper coil.●Bearing: 7005 (2pcs)and 7002(2pc) bearings ● Voltage and rated current: AC 220V, 5A● Max Rotation Speed:24,000 RPM●Radial runout: ≤0.025mm clamping mandrel vibrates at 30mm to nut● Frequencies: 400Hz●Size:80*213 (mm)●Collet: ER20 collet, 6mm is standard●Nut model: ER20-A(B)●Cooling way: water cycling cooling way●Lubrication way: high temperature resistance grease lubrication●Power interface: YX20 water proof aviation plug marked with number 1, 2, 3, 4. Number 1, 2 and 3 inter-faces are connected with inverter power U, V, W respectively. Number 4 is connected with earth wire