All Categories
Ruoshui Digital Clamp Multimeter makes household electricity maintenance safe and simple. It is the perfect startup multimeter for entry-level electricians, hobbyists, and general household uses. With a capacity of 600 amps, the clip can comfortably extend to test cords and wires up to 1.26 inch (32 mm) in diameter. The built-in clamp enables you to measure AC current without needing to break circuits to come into direct hazardous contact. Features: Back Light:Yes LCD Display Size:1.38 inch * 0.94 inch Auto Power Off:Yes Range Selection:Auto-Ranging Maximum Display:1999 Overload Protection:Yes Overload Display:Display OL or "1" Max.Jaw Opening:1.26 inch diameter Diode Test:Yes Triode Test:No Continuity Buzzer:Yes AC Current:Yes DC Current: No AC Voltage:Yes DC Voltage:Yes Capacitance:Yes Resistance:Yes Frequency:No Conductance:No Inductance:No Temperature:No Data Hold:Yes True RMS:Yes Maximum Value:Yes Minimum Value:Yes Non-Contact Voltage Test:Yes Square Wave Output:No Low Battery Indicator:Yes Power:2pcs 1.5V AAA Batteries Included Battery Life:about 750 hours Input Impedance:10MΩ Sampling Rate:approximately 3 times per second Safety / Compliances:IEC61010 CAT.II 600V, CAT.III 300V over voltage and double insulation. AC Current: 2A / 20A / 200A / 600A ±(2.5%+8) AC Voltage: 2V / 20V / 200V ±(0.8%+10) 600V ±(1.0%+10) DC Voltage: 200mV / 2V / 20V / 200V ±(0.5%+4) 600V ±(1.0%+6) Capacitance: 2nF / 20nF / 200nF / 2μF / 20μF /1000μF ±(5.0%+8) Resistance: 200Ω / 2KΩ / 20KΩ / 200KΩ / 2MΩ ±(1.0%+5) 20MΩ ±(1.2%+10) Packing List: 1x Digit Clamp Meter 2x 1.5V Batteries 2x Test Leads (a pair)