YOSUN V13H010L75 Projector Lamp for Epson PowerLite 1940W 1945W 1950 1955 1960 1965 EB-1940W EB-1945W EB-1950 EB-1955 EB-1960 EB-1965 ELPLP75 Replacement Projector Lamp Bulb with Housing

Pay with

About YOSUN V13H010L75 Projector Lamp For Epson PowerLite

Parameter: YOSUN new replacement Projector bulb with housing. Perfect match is only applicable to your correct Projector model. Lamp Life: 3000-4000 hours COMPATIBLE MODULES: fit for Epson elplp75 v13h010l75 PowerLite 1940W 1945W 1950 1955 1960 1965 EB-1940W EB-1945W EB-1950 EB-1955 EB-1960 EB-1965 Projector Warm Noted: Be sure to use an ELPLP75 Projector Lamp for replacement. Be sure to turn off the unit and unplug the power cord before replacing the lamp The lamp remains hot after the unit is turned off with the TV. If you touch the lamp, you may burn your fingers. When you replace the lamp Wait for at least 0.5 hour for the lamp to cool. Do not touch the surface of the lamp If you touch it, wipe off the fingerprints with a soft cloth Installation: 1. Turn off the Projector and unplug the AC power cord. 2. Loosen the screw on the lamp cover with a screwdriver, and then open the lamp cover. 3. Loosen the 2 screws on the lamp with the screwdriver. Hold up the handle, then pull the lamp straight out. 4. Hold the handle of the new lamp and push it in securely until it reaches the end, and then tighten the 2 screws. 5. Close the lamp cover, and then tighten the screws 6. Plug in the AC power cord.