We specialize in hard to find items
(3)
Hantek 3in1 Handheld Oscilloscope, 40MHz 2CH Automatic Digital Oscilloscope, Multimeter, Waveform Generator with LCD Color Screen, Chargeable with Replaceable Lithium Battery, 2CH+AFG+DMM 2D42
Share Tweet
*Price and Stocks may change without prior notice
*Packaging of actual item may differ from photo shown
- Electrical items MAY be 110 volts.
- 7 Day Return Policy
- All products are genuine and original
- Cash On Delivery/Cash Upon Pickup Available
Hantek 3in1 Handheld Oscilloscope, 40MHz 2CH Features
-
【3 in 1 Automotive Oscilloscope】Oscilloscope, multimeter, and waveform generator all in one. Features automatic frequency and amplitude measurements, cursor measurement auto-calibration waveform recording functions, and overload protection.
-
【Multifunctional Handheld Oscilloscope】40MHz bandwidth with 2CH channels. 250MSa/s sampling rate for Single-channel and 125MSa/s for Dual-channel. 10mV-10V vertical resolution for waveform generator. Competent in voltage, current, resistance, diode, capacitance, and continuity tests of AC/DC.
-
【Type-C Charging】 Ultra Low Power + Type C Data Transfer/Charging Interface; Be able to recharged by 5V/2A large current or ordinary computer USB port,allow while charging, very convenient and handy; Type C charging interface, after every recharge of 2 hours, the device can be used continuously for a full day or standby more than two months.
-
【User-friendly Interface】Versatile functions with an easy-to-read display and intuitive controls. Switch to different modes and functions swiftly with simple buttons. Automatic adjustment with Auto Set Key, which can adjust the horizontal and vertical scales as well as trigger coupling, type, position, slope, level, and mode automatically.
-
【Solid Hardware】Equipped with a high-resolution LCD screen that stays clear under bright light. The one-piece shell can resist strong impacts and heat. The retractable stand allows convenient placement in any working scene.
About Hantek 3in1 Handheld Oscilloscope, 40MHz 2CH
Featuers 3 in 1 Dual Channel Oscilloscope + Waveform Generator + Multimeter 250M Sampling rate, 40MHZ Bandwidth. 10MV-10V Vertical resolution Minimalist keyboard design simplify operation，easy to use Auto automatic measuring function Key tone settings Color highlight LCD screen,legible even in bright sunligh Adjustable backlight brightness, backlight Auto power off Digital voltmeter function. SpecificationSample Rate Range: 250MSa/s(Single-channel), 125MSa/s(Dual-channel) Waveform Interpolation: (sin x)/x Record Length: Max. 6K for single-channel; 3K samples per dual-channel SEC/DIV Range: 5ns/div~500s/div 1, 2, 5 sequence A/D Converter: 8-bit resolution,each channel sampled simultaneously VOLTS/DIV Range: 10mV/div~10V/divat input BNC Bandwidth Limit, typical: 20MHz Low Frequency Response (-3db): ≤10Hz at BNC Rise Time at BNC, typical: ≤5ns DC Gain Accuracy : ±3% for Normal or Average acquisition mode, 10V/div to 10mV/div Note: Bandwidth reduced to 6MHz when using a 1X probe. Mode : Auto, Normal, single Level : ±4 divisions from center of screen Slope : Rising, Falling, Rising & Falling Source : CH1/CH2 Supported Probe Attenuation Factors: 1X, 10X, 100X, 1000X Maximum Input Voltage: 150VRMS Standard Accessories: 1 * 3-in-1 Oscilloscope 2 * Clip Probes 1 * Test Probe 1 * Power Adapter 1 * USB Type-C Charging Cable 1 * Multimeter Probe 1 * Storage Bag and Manufacturer Certificate 1* Replaceable Test Wires Probes set
