We specialize in hard to find items
All Categories
Utoolmart 42mm/1.65" Bi-Metal Hole Saw, 25 mm Cutting Depth HSS Hole Cutter for Cutting Wood, Plastic, Drywall, Plasterboard and Soft Metal Sheet
Share Tweet
Utoolmart 42mm/1.65" Bi-Metal Hole Saw, 25 mm Features
-
【Construction Grade】- 1.65" Hole Saw is made of HSS M42 & high speed steel, impact resistance, wear resistance. With higher hardness, higher toughness and stronger resistance. Well made, sharp, hard, lasting. Comes with drill bit hardware.
-
【Clean Edge Design】- 42mm Hole Saw with the non-binding clean edge design. This hole saw cuts smooth and easy, which is ideal for soft wood, plastic plate, plater board and thin PVC board.
-
【Perfect Cutting】- 25mm (0.98") cutting depth, 10mm (0.39") shank diameter, 42mm (1.65") round holes in iron, aluminum plate, alloy plate, plastic sheet, aluminum plate with no binding or rough edges.
-
【Versatile Use】- The Hole Saw is suitable for 3-5mm soft metal thickness material. Widely used in drywall, insulation, sheetrock, outer board and siding. Hole saw for LED lights. Cuts easy and accurate size. Perfect for the job needed.
-
【Warm Reminder】- When cutting metal materials, it is necessary to add coolant throughout the process;When continuous cutting, please choose a lower speed;If there is any abnormality or unsatisfactory chip removal during the operation, it is necessary to stop working, and continue to work after pouring out the chips.
-
【Warm Reminder】- The larger the opening, the harder the material, and the slower the speed;To process a thickness of more than 10mm, it is necessary to remove the spring on the positioning drill;The power of the electric hand drill must be greater than 750W, and the use of impact drills is prohibited.
