NEWTRY 100 ton Low Profile Hydraulic Jack Cylinder + Hand Pump Stoke 69mm(2.72inch) Mini Protable Hydraulic Ram Industrial Thin Lifting Jack, not for Car (100T Hydraulic Jack + cp-700 Pump)

Pay with

About NEWTRY 100 Ton Low Profile Hydraulic Jack Cylinder

This hydraulic cylinder is not for the CAR (1). when several hydraulic jacks work at the same time, they should be directed by someone to make the lifting or falling simultaneously. Two adjacent hydraulic jacks shall be supported with wooden blocks to ensure that the gap is secured against sliding. (2). when using hydraulic jack, always pay attention to the sealing part and pipe joint part, and must ensure its safety and reliability. (3). hydraulic jacks are not suitable for sites where acids, alkalis, or corrosive gases are applied. 30 ton Hydraulic Ram Jack Parameters: Up and down without obstacles: Special treatment of piston to prolong service life Fast Connector + Plastic Dust-proof Cover: The joint adopts threaded ZG3/8 fast joint, thread locking and compact structure. Model: FPY-100D; Tonnage: 100T ; Stroke 1: 20MM; Stroke 2: 24MM; Stroke 3: 25MM ;Total stroke: 69MM Oil storage capacity: 225CC; Self height: 87MM; Weight: 20.5kg; Compression area: 56.7mm² Inner diameter 1: 30mm; Inner diameter 2: 52mm; Inner diameter 3: 81MM ; External diameter: 131x155mm CP-700 Hydraulic Hand Pump Parameters: Beautiful and durable, smooth surface, good sealing. Relief Valve: When working, tighten the return valve clockwise; When releasing pressure, loosen the return valve counterclockwise. Oil Tube and Joint: Comes with 1.8m oil tube;Fast Joint Thread ZG3/8. Ventilation Nut: There is a switch indication at the tail; When using, the nut must be loosened to avoid sealing of the oil tank. Model: CP-700 High pressure: 9947PSI(700kg/cm²) Low pressure: 284PSI(20kg/cm²) High pressure oil quantity: 2.3cc Low pressure oil quantity: 13cc Oil storage capacity: 900cc Weight: 9.5kg If you have any problems, please send emails to us.