All Categories
Get it between 2025-08-12 to 2025-08-19. Additional 3 business days for provincial shipping.
DIMENSIONS: Outer size for electrical weatherproof box is 11.3" x 4.3" x 3" and its inner size is 9.5" x 3.0" x 2.9". Each entry port fit up to 12AWG/3C or Φ12mm cord.
Designed to keep cord connection secure and protected. Perfect to seal 12, 14, 16, 18 gauge cord, braided wire and flat cable. Equipped with the 4 corner clips, snap-lock lid, and self-adjustable rubber gaskets. This outdoor power box has an IP44 waterproof rating which is good to protect your straight plugs, right angle plugs, transformers and power adapters.
Made with heavy-duty reinforced PP material to withstand rain, snow, water, dust, dirt and more, continuously protecting outdoor connections from electrical hazard.
Easy to use, just connect your cords, place the connection into the safety seal enclosure and close, no tools required.
Ideal for a wide range of outdoor & indoor applications including lawn and garden power tools, holiday and landscape decoration lighting, pool pumps, fountains, fish ponds, patio heaters, air conditioners, security cameras and more.
External dimensions: 11.4”(29cm) * 4.3”(11cm) * 3”(7.5cm). Inner dimension is: 9.5”(24.1cm) * 3”(7.5cm) * 2.9”(7.3cm).
Waterproof Tips: Do not place more than one cable in each port; Place the electrical box parallel to the ground, but do not place it vertically or obliquely; Do not submerge the box in water or bury it.
The Flemoon extension cord safety cover works with 18-16-14-12 gauge extension cord, as well as flat cable and braided wire. It has large housing and can protect most of right-angle plugs, power adapters, transformers and more cord connections. Size:11.4 x 4.3 x 3 inchCompatibility:Straight and right-angle plugs18-12 gauge extension cord and flat cableWaterproof: IP44Material:Reinforced PPColor:BlackPackage Quantity:1 Installation:To avoid electric shock, turn OFF the power switch before installation.Step 1: Open the cover with the snap-lock lid and 4 corner clips.Step 2: Place the cord connection and fasten the cord with the clamps.Step 3: Close the cover with the 4 corner clips and snap-lock lid.Step 4: Place the cover properly for protection.Note:1- To seal the flat cord, place the smaller rubber gaskets above the standard ones.2- To hang the cover, place the hanger above the rubber gasket and close the cover. CAUTION:- Turn off the power switch before handling the cover.- Do not bury the cover.- Do not submerge the cover in water.- To avoid breaking the seal, do not place more than one cable in each port.- Store the cover indoor while not in use.Warranty:100% satisfaction guarantee45-day money-back18-month hassle-free replacement