DAE MJ-100m 1" NSF61 Lead Free Potable Water Meter, Cubic Meter, Pulse Output + Couplings

Pay with

About DAE MJ-100m 1" NSF61 Lead Free Potable Water

1" Lead-Free Potable Water Meter with Pulse Output, NSF61 Certified, Measured in cubic meter, with Couplings (NPT Thread), Multi-Jet. Model: DAE MJ-100m Horizontal mount with dial facing upwards. For installing vertically, please refer to DAE PD-100 (www.amazon.com/dp/B08D7356MY), which can be installed in any position, vertically or horizontally, dial facing upwards or downwards or horizontally, water flowing downwards or upwards. Unit: Totalizer Measuring in cubic meter Accuracy: +/-1.5% within normal flow rate range as per AWWA Standard Pulse output: 0.01 cu m/pulse, a dry contact (i.e. no voltage) reed switch with 2 wires, 1.5m. The switch may be damaged if input electricity is more than 0.01A, 24V. We shall not be responsible with the result if connecting to third party device which is not certified by DAE. Meter body: Lead-Free Bronze Length without couplings: 260 mm (10.24 inches), Length with couplings: 384 mm (15.12 inches) Item dimension: 260 mm (10.24") length, 98 mm (3.86") wide, 118 mm (4.63") height. Weight: 2.58 kg (5 lbs 11 once) NSF61 Certified Lead Free Couplings Included Max. Reading: 99,999.9999 cu m, Min. Reading: 0.0001 cu m. The 1st digit from the right is in cu m. Max. working pressure: 1.6 Mpa (232 psi), exceeding the requirement from AWWA standard 150 psi. Max temperature: 122˚F (50˚C) Pressure drop: 0.145 psi @ 1.136 cu m/h (5 GPM), 1.380 psi @ 3.407 cu m/h (15 GPM), 3.480 psi @ 5.678 cu m/h (25 GPM) Conforms to ISO 4064, AWWA C708, for clean water only. Safe Maximum Flow Rate: 11.356 cu m/h (50 GPM), Recommended Maximum Continuous Flow Rate: 5.678 cu m/h (25 GPM), Minimum Test Flow Rate: 0.17 cu m/h (0.75 GPM), Normal Test Flow Limits: 0.681 - 11.356 cu m/h (3-50 GPM) Bore diameter: 1.14 inch (29mm)