Ultra Bright DC 12V COB LED Panel Light with Remote Control Dimmer, Max 70W 7000LM Chip Strip, LED Module for Outdoor Camping Hiking Lamp, Car Battery Drive Lights Emitting White 6500K

Pay with

Ultra Bright DC 12V COB LED Panel Light with Remote Features

• Ultra Bright & Energy Saving ----- Maximum 70W can emit the brightness equivalent to a 350W halogen lamp, More brightness, More energy saving.

• Multi-mode Adjustment ----- COB LED With RF Wireless Remote controller. 8 Dynamic modes,10 Brightness level can be adjusted. Easily switch the brightness of the light (25%, 50%, 100%), Accept smooth dimmer effect to meet your lighting needs on different occasions, Adapt to use in various scenarios.Remote Distance more than 15m at open area.

• High-quality ----- There are 336pcs high-brightness diode LED FLIP chips on board, The chips are evenly arranged on the aluminum board, The brightness is soft and without dead spots. 8.7x4.4IN Aero-grade aluminum board, Enough hardness and high heat-dissipation efficiency to get longer life-span.

• Multiple power supply options ----- Use by connecting any DC 12V power, Max current 5A ,Such as Car battery, AC to DC power supply, Power transformer, Adapter...

• Easy to use ----- The thickness of the product is less than 4mm, Easy to carry and install. No heat sink is needed When connecting DC 12V constant voltage Power, For longer life-span, Please add a heat sink when input DC 13V or higher.

About Ultra Bright DC 12V COB LED Panel Light With Remote

Board size:8.7x4.4IN Thickness:0.16IN Emitting diameter:8x3.9IN Power:About 35W at DC 12V, About 70W at DC 14V Max input current: DC 5A Color temperature:6000K-6500K CRI: Ra>80 Beam angle: 120° Luminous efficacy: >110LM/W Remote distance: More than 15m at open area Application: LED garden lights outdoor, Car lamp,Outdoor/Indoor room decor, DIY led strip lighting... Package include: 1pcs COB LED Panel Light 1pcs 11 Keys remote(Package Without battery,please add CR2025) 1pcs Receiver(Solder on LED lamp pads) Please note If the remote doesn't work, please do following steps to re-pair the remote controller: 1. Put CR2025 battery into remote. 2. Pug off the power of main unit and plug in later 5 seconds. 3. Press 'speed -' and'speed +' key together in 5 seconds . 4. The LED panel will flash one time . 5. After this operation , the main unit will recognize the new remote controller.