We specialize in hard to find items
(2)
Stronghero3D PLA 3D Printer Filament 1.75mm,Sparkle Twinkling Filament,Glitter Galaxy Rainbow, Multi Colors, Accuracy +/-0.05mm Net Weight 1kg(2.2Lbs) for Bambulab P1P P1S H2D
Share Tweet
*Price and Stocks may change without prior notice
*Packaging of actual item may differ from photo shown
- Electrical items MAY be 110 volts.
- 7 Day Return Policy
- All products are genuine and original
- Cash On Delivery/Cash Upon Pickup Available
Stronghero3D PLA 3D Printer Filament 1.75mm,Sparkle Features
-
Amazing Sparkle twinkling effect.Stronghero3D galaxy pla infused with expensive and high-grade glitter powder densely ,eye-catching flickering effect and evenly spread over the surface of the filament, twinkling like the scattered stars in the night sky.Perfect for artistic designs, decorations, and gift items.
-
The new version product ensures that there will be no nozzle clogging during 3D printing. PLA raw material is imported from USA, no recycled material nor reworks material, stable diameter control and no jam.PLA filament 1.75mm,net weight 1kg.Vacuum sealed and includes silica desiccant.
-
It is suggested that the nozzle should be used at a temperature of 195-215 ℃. If hairy occur when printing, adjusted gradually by 5-10 ℃ each time. The platform can be glass, acrylic plate or PEI sheet, heat bed temp 50-70 ℃.
-
For better printing smoothness and success, nozzle 0.4mm or bigger,layer height 0.2mm or bigger,printing speed lower than 150mm/s,using cheap and easily replaceable nozzles hot end is necessary if Bamboo’s 3D printer.
-
To prevent filament tangling, make sure to secure the filament end either within the spool's designated hole or elsewhere after 3D printing. In case the filament end accidentally slips past during extrusion, rewind the filament to check for any potential tangles.
-
In order to reduce possible warping of the first layer, we recommend preheating the hot bed temperature to 55-65 degrees, reducing the printing speed of the first layer to 25mm/s, and setting the line width to 0.6mm or the flow rate to 150%, excessive fan cooling in cooler weather will worsen edge warping.
