FOUR E'S SCIENTIFIC Digital Dry Bath Incubator with 20 x 1.5ml Heating Block & Temperature Sensor, Up to 302℉/150°C, LED Display, High Temperature Precision, Timing Control for Laboratory

Pay with

FOUR E'S SCIENTIFIC Digital Dry Bath Incubator with Features

• 【Precise Temperature Control】The temperature of this Lab Dry Bath Incubator Heater is up to 302℉/150°C and the temperature control accuracy is ±0.2°C, display accuracy ±0.1°C. has an Intuitive LED digital display, easy to operate. Room temperature to 150°C in less than 30 minutes.

• 【Troubleshooting Alert Function】When the Lab Dry Bath Incubator Heater fails, the corresponding fault code will be displayed and the buzzer will sound. Error Code E1: Fault type, short circuit of the external sensor; Error Code E2: Fault type, the internal sensor is open; Error Code E3: Fault type, short circuit of the internal sensor; Error Code E4: Fault type, the external sensor is not placed in the module.

• 【Appointment Cancellation & Activation】Cancel/start the reservation function by pressing P1 and P3 at the same time. Press the P1 and P2 keys at the same time to switch between ℉and ℃.

• 【4 Program Setups】The system can save 4 sets of programs of the temperature and time, 1min to 99h59min. When Digital Dry Bath Incubator is powered on but not when working, short press the button of “Prog.” to select the 4 default programs from P1 to P4. Program for quick operation.

• 【Heating Block】Including 20x1.5mL Heating Block x 1, hole diameter is Φ11.5mm/0.45inch, the hole depth is 36.9mm/1.45inch. Suitable for 1.5ml conical centrifuge tube. Snuggly holds the test tubes enabling precise and uniform heating. Included PT1000 temperature sensor allows temperature control directly in the sample vessel. Automatic calibration with external PT1000 temperature sensor.

About FOUR E'S SCIENTIFIC Digital Dry Bath Incubator With