BGTEC Diamond Beveling Chamfer Bit 2pcs 3"(75MM) x 5/8"-11 Thread for Existing Holes Enlarging Shaping Trimming Tile Marble Granite Ceramic Countersink Drill Bits for Angle Grinder

Pay with

BGTEC Diamond Beveling Chamfer Bit 2pcs 3"(75MM) x Features

• 2pcs Diamond Beveling Chamfer bit;Dia 75mm(3"): workable length 55mm; 5/8-11 thread; Grit #80; Angle: 40 degree

• The beveling chamfer bit designed to enlarge or trim round holes in ceramic, glass, granite stone tile marble etc. Also suitable to create round shape indentation to accommodate pipes or wires.

• Save your money:one standard core bit can create many holes of different sizes(35MM-75MM). without buying several different core bits.

• Dry or wet used by Angle Grinder. Make the hole edge surface effect, smooth and clean.

• Note: This is not a core bit for drilling. It doesn't make holes but it bevels the hole cleaning and reinforcing the borders when the borders are chipped or need to be clean.

About BGTEC Diamond Beveling Chamfer Bit 2pcs 3"(75MM) X

Item: Vacuum Brazed Diamond Chamfer bits Milling bits For enlarging, polishing and bevelling the exsit holes Application:For bevelling,enlarging,grinding and polishing the exsit holes. Specification: Dia 75mm(3"): workable length 55mm; 5/8-11 thread; Grit #80; Angle: 40 degrees Quantity: 2pcs Features: 1. Cutting edge high-end vacuum brazing process provides better performance and longer service life for the product; 2. High concentration diamond is vacuum brazed on the surface of the chassis to provide faster enlarging and grinding speed; 3. The #80 fine-grained diamond, through fine grinding, can produce excellent surface effect on the edge of the hole, smooth and clean; 4. Bevel Ease chamfers and stress relieves rough holes in glass, ceramic and porcelain tiles; 5. 5 / 8 "- 11 thread is available for angle grinder. 6. Dry or Wet use. PLEASE NOTE : This is not a core bit for drilling. It doesn’t make holes but it bevels the hole cleaning and reinforcing the borders when the borders are chipped or need to be clean; Reduce the contact surface, tilt moderately, do not press directly with force, shake slowly and slightly along the force, and the range should not be too large.