X
iCESugar-nano FPGA Development Board Open Source
iCESugar-nano FPGA Development Board Open Source
iCESugar-nano FPGA Development Board Open Source
iCESugar-nano FPGA Development Board Open Source
iCESugar-nano FPGA Development Board Open Source
iCESugar-nano FPGA Development Board Open Source
iCESugar-nano FPGA Development Board Open Source
iCESugar-nano FPGA Development Board Open Source
iCESugar-nano FPGA Development Board Open Source

iCESugar-nano FPGA Development Board Open Source RISC-V iCE40LP1k Standard PMOD Connector (iCESugar-nano)

Product ID : 51490694


Galleon Product ID 51490694
Shipping Weight 1.1 lbs
I think this is wrong?
Model
Manufacturer MiiElAOD
Shipping Dimension 3.94 x 3.94 x 3.94 inches
I think this is wrong?
-
No price yet.
Price not yet available.

Pay with

iCESugar-nano FPGA Development Board Open Source Features

  • iCESugar-nano Repo: http://github.com/wuxx/icesugar-nano


About ICESugar-nano FPGA Development Board Open Source

Product introduction iCESugar-nano is an open source FPGA development board based on Lattice iCE40LP1k-CM36. It’s fully supported by the open source toolchain (yosys & nextpnr & icestorm). All the IOs are led out with 3 standard PMOD connectors. The on-board debugger iCELink based on ARM Mbed DAPLink supports drag-and-drop programming. You can just drag the FPGA bitstream into the virtual disk to program. Besides, the iCELink provides a adjustable clock to FPGA and a additional USB CDC serial port direct connecting to FPGA. Just with one TYPE-C cable, you can start to develop and test the board. Features -iCE40LP1k main chip, 1280 LUT/8KB SRAM/PLL -On-board iCELink debugger, supporting drag-and-drop programming and USB CDC serial port -Lead out 14 usable IOs with one 2*6 Pin PMOD connector and two 1*6 Pins PMOD connectors -Totally use open source tool chain to develop -On-board 2MB SPI-Flash W25Q16