TOYTENSI 30A 2-4S RC Brushless Motor ESC for RC Plane Airplane with SBEC 5V/6V 4A

Pay with

TOYTENSI 30A 2-4S RC Brushless Motor ESC for RC Features

• High-performance 32-bit microprocessor, compatible with various brushless motors.

• High-power switch mode BEC with 5V/6V 4A output, employ more electronic devices, such as receivers and servos.

• Pre-installed XT60 connector for the battery and 3.5mm gold connectors for the motor, no soldering is required.

• Power on protection, over-heat protection, low-voltage protection and lost-signal protection.

• Programmable via the LCD Program Box or transmitter.

About TOYTENSI 30A 2-4S RC Brushless Motor ESC For RC

𝐈𝐍𝐓𝐑𝐎𝐃𝐔𝐂𝐓𝐈𝐎𝐍: Designed specifically for RC fixed-wing airplanes, TOYTENSI 20A-100A brushless speed controllers possess the high reliability and quality you have come to expect throughout our entire product line. These must-have brushless speed controllers provide smooth and accurate throttle linearity for all your flights. 𝐅𝐄𝐀𝐓𝐔𝐑𝐄𝐒: ●Super smooth and accurate throttle linearity ●Selectable high voltage switching BEC (Battery Eliminator Circuit) ●Support for most motors, including high RPM motors ●Utilizes new MOSFET technology for low heat and high reliability ●Power on protection, over-heat protection, low-voltage protection and lost-signal protection 𝐒𝐏𝐄𝐂𝐈𝐅𝐈𝐂𝐀𝐓𝐈𝐎𝐍𝐒: ●𝗣𝗿𝗼𝗱𝘂𝗰𝘁 𝗡𝗮𝗺𝗲: TOYTENSI 30A 2-4S SBEC ESC ●𝗖𝗼𝗻𝘁./𝗣𝗲𝗮𝗸 𝗖𝘂𝗿𝗿𝗲𝗻𝘁: 30A/40A ●𝗜𝗻𝗽𝘂𝘁 𝗩𝗼𝗹𝘁𝗮𝗴𝗲: 2-4S LiPo ●𝗕𝗘𝗖 𝗢𝘂𝘁𝗽𝘂𝘁: 5V/6V 4A ●𝗜𝗻𝗽𝘂𝘁 𝗖𝗼𝗻𝗻𝗲𝗰𝘁𝗼𝗿𝘀: XT60 (Male) ●𝗢𝘂𝘁𝗽𝘂𝘁 𝗖𝗼𝗻𝗻𝗲𝗰𝘁𝗼𝗿𝘀: 3.5mm Gold Connectors (Female) ●𝗟𝗲𝗻𝗴𝘁𝗵: 59mm/2.32in ●𝗪𝗶𝗱𝘁𝗵: 26.2mm/1.03in ●𝗛𝗲𝗶𝗴𝗵𝘁: 9.2mm/0.36in ●𝗪𝗲𝗶𝗴𝗵𝘁: 33.6g 𝐒𝐄𝐓𝐓𝐈𝐍𝐆𝐒: ●𝗦𝗠𝗥 (𝗦𝘄𝗶𝘁𝗰𝗵 𝗠𝗼𝘁𝗼𝗿 𝗥𝗼𝘁𝗮𝘁𝗶𝗼𝗻) 𝗙𝘂𝗻𝗰𝘁𝗶𝗼𝗻: *𝗢𝗙𝗙/ON ●𝗕𝗿𝗮𝗸𝗲 𝗧𝘆𝗽𝗲: *𝗢𝗙𝗙/Soft Brake/Mid Brake/Hard Brake ●𝗠𝗼𝘁𝗼𝗿 𝗧𝗶𝗺𝗶𝗻𝗴: *𝗔𝘂𝘁𝗼/Low/Mid/High ●𝗠𝗼𝘁𝗼𝗿 𝗥𝗼𝘁𝗮𝘁𝗶𝗼𝗻: *𝗖𝗪/CCW ●𝗦𝗥 (𝗦𝘆𝗻𝗰𝗵𝗿𝗼𝗻𝗼𝘂𝘀 𝗥𝗲𝗰𝘁𝗶𝗳𝗶𝗰𝗮𝘁𝗶𝗼𝗻) 𝗙𝘂𝗻𝗰𝘁𝗶𝗼𝗻: ON/*𝗢𝗙𝗙 ●𝗕𝗮𝘁𝘁𝗲𝗿𝘆 𝗖𝗲𝗹𝗹𝘀: *𝗔𝘂𝘁𝗼/2S/3S/4S ●𝗟𝗼𝘄 𝘃𝗼𝗹𝘁𝗮𝗴𝗲 𝗖𝘂𝘁𝗼𝗳𝗳 𝗧𝗵𝗿𝗲𝘀𝗵𝗼𝗹𝗱: OFF/NIMH50%/NIMH60%/*𝟯.𝟬𝗩/3.2V/3.6V ●𝗟𝗼𝘄 𝘃𝗼𝗹𝘁𝗮𝗴𝗲 𝗖𝘂𝘁𝗼𝗳𝗳 𝗧𝘆𝗽𝗲: *𝗥𝗲𝗱𝘂𝗰𝗲 𝗣𝗼𝘄𝗲𝗿/Cut off Power ●𝗕𝗘𝗖 𝗩𝗼𝗹𝘁𝗮𝗴𝗲: *𝟱𝗩/6V ●𝗔𝗰𝗰𝗲𝗹𝗲𝗿𝗮𝘁𝗶𝗼𝗻: *𝗡𝗼𝗿𝗺𝗮𝗹/Soft The options marked with “*” are the factory default settings.