Knwigoe 110v Glue Dispenser Pneumatic Glue Dot Dispenser Machine with Air Semi-Automatic/Manual Dispensing Controller Solder Paste Liquid Adhesive Controlling Dropper Tool

Pay with

Knwigoe 110v Glue Dispenser Pneumatic Glue Dot Features

• Precise Drip: The minimum drip volume is 0.01ML, and the spitting interval is 0.1-9.9s. The glue dispenser can drip precisely and achieve a repeat accuracy of about 0.5%. It is also equipped with a single-hole hand control switch, allowing you to control it personally by hand for more accuracy and timeliness.Moreover,This semi-automatic glue dispenser can effectively prevent the glue from dripping during use

• Semi-automatic Design:The dispensing solder paste with controller can be both automatically dripped by the machine and precisely controlled by a single-hole hand switch. If you want to free your hands, you can set the switch to the automatic position, in additon,this item adopts a high-quality electronic valve, which can instantly start the diaphragm valve and increase the working efficiency by more than 80%.

• Stable Voltage Change: Features a high-end all-copper coil transformer, which can stabilize the voltage change，the Pneumatic Glue Dot Dispenser is also equipped with high-quality electronic valves, with a certain anti-impregnation function, to better ensure operational safety and increase the service life, and can be used in high-frequency and high-intensity work scenarios, improving operational safety while being efficient and energy-saving.

• High-precision Air Pressure Gauge: The high-precision air pressure gauge can precisely control the air pressure input to the air pump and convert the air pressure precisely to ensure that the air tube will not break.

• High-precision Air Pressure Gauge: The high-precision air pressure gauge can precisely control the air pressure input to the air pump and convert the air pressure precisely to ensure that the air tube will not break.

• Solid and Durable: The Semi-Automatic/Manual Dispensing Controller is made of metal, strong and stable, not easy to damage , but also uses the fourth generation chip design circuit board, significantly improving stability.

About Knwigoe 110v Glue Dispenser Pneumatic Glue Dot

Specification Model: 982 Material: Metal Spitting Mode: Manual / Semi-automatic Minimum Drip Volume: 0.01ml Spitting Time Interval: 0.1-9.9s Automatic Timing(Can Be Set): 0.01-30s Repeat Accuracy: ±0.5% Internal Voltage: 12-24DC Input Air Pressure: 2.5-7bar(35-100psi) Output Air Pressure: 0.1-5.5bar(1-78psi) Power Supply: 110V AC, 60Hz Power Consumption: 20W Plug Specification: American Standard 110V Product Size:23x15x6cm/9.05x5.9x2.36in Package Size:20x26x14cm/10x9x12.5in Gross Weight: 2.1kg/4.63 lbs Notes: 1.The input high pressure should not exceed 7 bar (100psi), and the maximum working pressure of the glue dropper should not exceed 5.5 bar (78psi). If the working air pressure is above 4 bar, please switch to aluminum connectors. 2.If available, store all materials at a constant temperature (5°) as directed to ensure that the concentration does not change significantly during use. 3.When the material concentration is too large (flow difficulties), can not drip, if you want to use it, according to the manufacturer's instructions dilute the use; before work, the material must be fully stirred evenly to ensure that the size of the drip consistent. 4.Automatic state, the general air pressure adjustment in the machine at 1-2.7bar (15-40psi) is more appropriate. When working in the automatic state, the strength of the vacuum tube pumping back air should be adjusted to the proper position. Too much pumping back will flush the piston and destroy the normal operation. 5.Automatic state work, according to the actual situation, timely removal of the material left at the needle nozzle, these materials gradually curing will block the muzzle discharge and back pumping; after work, the barrel should be cleaned in time, otherwise, the barrel's disassembly will be very difficult.