HVAC Blower Motor Assembly 9S4Z19805A 700217 Heater Blower Motor with Fan Cage for 2008-2011 Ford Focus, 2001-2003 Hyundai Elantra, 2003-2008 Hyundai Tiburon

Pay with

HVAC Blower Motor Assembly 9S4Z19805A 700217 Heater Features

• ★★ FITMENT: 2008-2011 Ford Focus, 2001-2003 Hyundai Elantra, 2003-2008 Hyundai Tiburon

• ★★ REPLACE OEM: 9S4Z19805A, 700217

• ★★ FUNCTION: HVAC Blower Motor with Fan is responsible for producing air that goes through the vents of your vehicle's AC and heating system. If your AC or Heater does not produce or circulate any heated or cooled air then you may have a problem with your blower motor.

• ★★ HIGH QUALITY: Every Blower Motor must take inspected and tested multiple times before the shipment,Our Blower Motor Model with strong heat dissipation,reduce the rate of burning electronic parts

• ★★ LIMITED LIFETIME WARRANTY: This Blower Motor with a limited Lifetime Warranty.Please check the description and compatibility chart before your purchasing, Please contact us if you have any question regarding our this product

About HVAC Blower Motor Assembly 9S4Z19805A 700217 Heater

FITMENT: * 2008-2011 Focus * 2001-2003 Hyundai Elantra * 2003-2008 Hyundai Tiburon Replaces Part Numbers: * 9S4Z19805A * 700217 How to replace with new HVAC blower motor? * 1 Always wear eye protection and start with installation tools. * 2 Locate the HVAC blower motor under the passenger side dash. Removing the dash may be necessary to access the blower motor on some vehicles. (Note: On older vehicles, the blower motor may be * located in the engine compartment on the passenger side firewall.) * 3 Disconnect the blower motor electrical connector. * 4 Remove the retaining screws to the blower motor assembly. * 5 Remove the box and blower motor assembly. * 6 Remove the blower motor retaining screws. Remove the motor from the box. * 7 Compare the new blower motor to the old one to verify that you have the correct part. Install the new motor into the box and tighten the retaining screws. Re-install the blower motor assembly. * 8 Connect the blower motor electrical connector. * 9 Operate the heating and A/C system. Verify that the blower motor operates at all speeds and that the system produces hot and cold air. * 10 Searching related installation video on the internet will be also recommended.