All Categories
Get it between 2025-08-08 to 2025-08-15. Additional 3 business days for provincial shipping.
Waterproof sealant: This clear caulk seals out air, water, and moisture with 100% silicone as cured
Speed meets strength: Caulk & Seal's silicone caulk is ready for water exposure in as little as 30 minutes
All-purpose: Gorilla caulk works wherever the work is; Indoor and out, rain or shine after fully cured
Gorilla tough: This clear silicone caulk is not only mold & mildew resistant, it won't yellow, shrink or crack over time
Use on: Our sealant is perfect for windows, doors, stainless steel, fixtures, countertops, laminate, porcelain, sink, shower, tub/tile, granite, ceramic, gaps & cracks, painted surfaces, wood, vinyl, metal, aluminum, trim/siding, cables, glass, drywall, stone, marble, gutters, plumbing, and more
Gorilla Waterproof Caulk & Seal 100% Silicone Sealant* seals out water; air and moisture and is great for kitchen; bath; window; doors; auto; marine plumbing; gutters and more! Ready for water exposure in just 30 minutes; this long lasting sealant is not only mold & mildew resistant; but won't yellow; shrink or crack over time! *as cured DIRECTIONS: All surfaces should be clean and free of dirt; grease; oil and old sealant. Best if used above 40°F. 1) Unscrew cap; fold and screw-on nozzle. Cut to desired bead size. 2) Apply sealant; pushing bead ahead of nozzle. 3) Smooth bead immediately after application; before a skin forms. TO OPEN: Cut nozzle at 45° angle to desired bead size. Puncture inner foil seal. STORAGE: Replace cap tightly to prevent material from curing. Store in a cool; dry location. To re-use nozzle; remove sealant from nozzle once cured. STORE AWAY FROM CHILDREN AND ANIMALS. CLEAN-UP: Wipe off wet sealant immediately with a dry cloth. Isopropyl alcohol may be used according to solvent manufacturer’s instructions. Service Temp: -40°F to 350°F (-40°C to 176°C) †NOTE: Do not use on wet; damp; frozen or contaminated surfaces. Not paintable. Not for use in underwater applications; aquariums; on brick; masonry; cementitious materials or on metals sensitive to corrosion including brass and galvanized metals. For general auto/marine applications only. Not for under hood or direct gasoline exposure. For gaps larger than ½” use backer rod. Can be exposed to water in as little as 30 minutes based on 3/16" bead at 70°F and 50% humidity. Otherwise; wait 24 hrs.