Concrete Acid Stain | Golden Wheat 1 Gallon

Pay with

Concrete Acid Stain | Golden Wheat 1 Gallon Features

• Concrete Acid Stain - Natural marbling effect.

• Chemical Reaction so the stain is permanent.

• Professional grade product that anyone can use.

• UV Stable - great for interior and/or exterior applications.

• Detailed System Instructions Below and sent with every package

About Concrete Acid Stain | Golden Wheat 1 Gallon

Step 1: Prepare the floor with the Concrete DNA Diamond Pad with Resins (ASIN: B06XXC1VVV). This is the 30 grit prep pad. Run the pad with plenty of water under a low speed floor buffer with our Super Blue product diluted at a minimum of 9 parts water. (ASIN: B01H7KGEUA) Squeegee the water and remove from the floor with a wet/dry squeegee vac Ensure the floor is clean from dust and footprints. Let the floor dry completely Step 2: Spray the floor with the stain and ensure 100% coverage. Let the stain dry on the floor. When it is dry the stain is done reacting. Thoroughly flush the residue from the stain off the floor with water and clean the floor free from dust. Tip: If you run your finger over the floor and your finger picks up residue continue flushing until residue is gone Let the floor dry completely overnight Step 3: Apply Ez Seal (ASIN: B01H7L8G3M) with a 3/8” nap roller Apply at least 2 thin coats Step 4: Allow Ez Seal to dry for at least 12 hours before applying Ez-Glo (ASIN: B01H7MJ8JM) Apply at least 1 coat of Ez-Glo by using a microfiber mop