YEFU Tile Leveling System Clips 1/8" Include 300 Pcs Tile Leveler Spacers More Flexible Combination for Tile Leveling Installation

Pay with

About YEFU Tile Leveling System Clips 1/8" Include 300

Products include Size: 1/8 inch Tile Leveling System Clips (3mm) Package contains: 300 Tile Leveling System Clips Working with the Tile Leveling System 1/8" Kit How to install: 1. Apply a proper amount of cement glue 2. Place tile spacer according to the size of tile 3. Square tile and tap it with a rubber hammer 4. Insert tile wedges 5. Adjust pliers screws to determine pushing distance (to ensure that each wedge is pushed at the same distance then ensure the same level of tile) 6. Push tile wedge with pliers 7. Clean the gap between cement 8. One tile suggests use four tile spacers 9. After 24 hours, kick out it, or tap side of the rubber hammer  Tips: 1. Do not apply too thick cement prevent clips will sink too deep, causing tile wedges can’t be inserted and difficult to disassemble. 2. Do not use excessive force when installing tile spacers with tile pliers, which may cause the spacer base break easily. 3. The tile spacer is disposable (warm reminder: although we check each one before leaving the factory, there is a possibility that some damage will occur during transportation), so please purchase sufficient quantity to ensure construction going well. The 1/8 tile leveling clip has a unique V-notch design of 1/8’’! The coverage of tile spacer depends on the quality and pattern of tile. We recommend leaving 10-20% more. The tile leveling system is to push the tiles instead of lifting the tiles to provide better tile adhesion. It ensures the flatness between tiles, prevents the tiles from warping when the tiles solidify, and prevents the mortar from moving during solidification. The tile leveling system facilitates the installation of tiles, saves installers time and minimizes the amount of work required for perfect flatness.