PARTALL Film #10 Polyvinyl Alcohol (PVA) Gallon

Pay with

PARTALL Film #10 Polyvinyl Alcohol (PVA) Gallon Features

• Partall Film #10 is a water/alcohol-based polyvinyl alcohol (PVA) mold release agent that forms a barrier between parts and mold surfaces that are still curing (green or recently reconditioned molds can be reactive).

• Partall Film #10, the original green parting film, is resistant to solvents and styrene yet is water soluble.

• Protects against mold hang ups with polyester and vinyl-ester resins; also used with epoxy and urethane resins

• PVA is most commonly applied over mold release wax although some users find success by adding wax over the PVA film (giving a second part cycle before replacing PVA.)

• Partall Film #10 can also be used as a surface cure agent during gel coat repairs (locks out moisture in the air that inhibits resin cure).

About PARTALL Film #10 Polyvinyl Alcohol (PVA) Gallon

Partall Film #10 is a water/alcohol-based polyvinyl alcohol (PVA) mold release agent that forms a barrier between parts and mold surfaces that are still curing (green or recently reconditioned molds can be reactive). Partall Film #10, the original green parting film, is resistant to solvents and styrene yet is water soluble. Protects against mold hang ups with polyester and vinylester resins; also used with epoxy and urethane resins. PVA is most commonly applied over mold release wax although some users find success by adding wax over the PVA film (giving a second part cycle before replacing PVA.) Partall Film #10 can also be used as a surface cure agent during gel coat repairs (locks out moisture in the air that inhibits resin cure). Now improved for easier lay out, Partall Film #10 allows application by brush, roller, sponge or cloth as well as excellent spray characteristics.