We specialize in hard to find items
All Categories
DTECH RS232 to RS485 Converter Serial Adapter with 4 Position Terminal Block for Long Haul Data Communication Supports 600W Anti-Surge
Share Tweet
*Price and Stocks may change without prior notice
*Packaging of actual item may differ from photo shown
- Electrical items MAY be 110 volts.
- 7 Day Return Policy
- All products are genuine and original
- Cash On Delivery/Cash Upon Pickup Available
DTECH RS232 to RS485 Converter Serial Adapter with Features
-
Port powered RS232 to RS485 Converter used in Long-haul Communication up to 4000ft (1200 meters)
-
RS232 to RS485 adapter enables the connections of multiple bus nodes and 32 devices can be joined in RS-485 network
-
Automatic RX - TX Control; RS-232 to RS-485 Converter controls the “Receive” and “Transmit” modes automatically
-
Up to 115.2kbps baud rate (auto-detect) can be applied to point to point two wire half duplex and point to multi-point two wire half duplex communication
-
A built-in Transient Voltage Suppressor (TVS) supports 600W anti-surge protection on each line of RS485 link which effectively guard devices from damage
About DTECH RS232 To RS485 Converter Serial Adapter With
RS-232 to RS-485 converters are mostly used in industrial and commercial environments. The reason is that the RS485 converter can be used for multi-drop networks, meaning that you for example can connect multiple RS485 devices to one computer. Up to 32 devices can be connected in one network to communicate on a single pair of wires (plus a ground wire) . This type of communication is called half-duplex communication. Most quality RS485 converters can communicate in this manner of up to 4000 feet (1200 meters) . RS232 to RS485 serial converter is also fairly resistant to noise which is one more reason why it is favored in industrial environments. Guard Your Value Equipment A built-in transient voltage suppressor (TVS) supports 600W anti-surge, effectively guard your value devices from the hazards of transient surges, lightning. No Driver Required Auto control data flow direction of I/O circuit feature makes it fully plug-and-play. Port-Power No external power supply required, it is port-powered from RS232 data lines and low consumption electricity. Mini-Size with 2 screws and terminal block Specific Standard: EIA/TIA RS232C / RS485 Baud Rate: 300bps - 115.2kbps Working Mode: 2 wire asynchronous half-duplex Communication Mode: Point to Point, Point to Multipoint Transmission Media: Twisted Pair (Wire diameter >= 0.5mm) or Shielded wire Transmission Distance: RS232 Interface: up to 50ft (15m) ; RS485 Interface: up to 4000ft (1.2km) Surge Protection: RS485 Interface, Each wire 600W Original Packing Included 1 X DTECH RS232 to RS485 Converter
