We specialize in hard to find items
All Categories
YIOVVOM USB to TTL Serial Adapter, USB to Serial Converter for Development Projects - Featuring Genuine FTDI USB UART IC ¡®FT232BL¡¯ Chip Compatible with Windows 10
Share Tweet
*Price and Stocks may change without prior notice
*Packaging of actual item may differ from photo shown
- Electrical items MAY be 110 volts.
- 7 Day Return Policy
- All products are genuine and original
- Cash On Delivery/Cash Upon Pickup Available
YIOVVOM USB to TTL Serial Adapter, USB to Serial Features
-
Built-in a new and original FTDI IC device ‘FT232BL’, which handles all the USB signal ling and protocols. TTL levels of +5V and +3.3V adjustable design, and draws power directly from your PC/laptop via the USB connection, no need for an external power adapter
-
Designed to be used for USB to TTL electronic projects, easy to connect to your MCU or Raspberry Pi. Status LED for TX,RX,USB which can show serial adapter status and data activity at a glance
-
Supports Windows 2000, XP, Vista, Window 7,8,10, Mac OS 9, Mac OS X & Linux and above OS, Linux and Mac OS will install FTDI driver automatically, but NOT compatible with Chrome OS. For details of OS compatibility and installation guidance, please scroll down this page and take a look at 'Product description'
-
USB to serial adapter is seen as a COM port by your computer/laptop, and is available for use by any program that accesses COM ports.
-
Pack: 1 x USB to TTL Module + 2 x Jumper + 5 x DuPont Cables (26mm, female to female), which are packed by anti static bag. We offer 12 months warranty.If you meet any question, please contact us, we will fix your issue within 24 hours.
About YIOVVOM USB To TTL Serial Adapter, USB To Serial
It works great for programming microcontrollers such as the arduino, boarduino, Bareduino, Raspberry Pi, ESP8266, micro minimOSD, and Atmel Xmega Xplained, Atmega328 mini pro, or any other that can be programmed over serial After installing the driver,This FTDI TTL adapter will simulate a COM port on your computer/laptop. Through this simulated COM port, you can communicate or program with various hardware or MCUs, such as: arduino board, Raspberry Pi, ESP8266, router and so on. Instructions for use：（Example MCU） GND: Connect to GND RXD: Connect to MCU.TX (Signal Flow: MCU.TX >> FT232 >> PC.RX) TXD: Connect to MCU.RX (Signal Flow: MCU.RX PC.CTS) Specification: Main chip: FTDI FT232BL Pin Definition: CTS,RTS,RXD,TXD,GND,VCC Output VCC: 3.3V or 5V USB interface: 2.0 With 500MA self-recovery fuse reversed does protection The maximum speed: 921600bps List of supported systems 1,Windows xp,7,8,10 2,Ubuntu 11.10, kernel 3.0.0-19 3,Mac OS X 10.3 to 10.8 (32 &64 bit) 4,Mac OS X 10.9 and above(64 bit) You can download the driver directly from FTDI's website http://www.ftdichip.com/Drivers/VCP.htm Packing list: 1 X FTDI USB to TTL Adapter 1 X 5PIN DuPont cable Installation Guides If you need further support about how to pick up and install drivers, please goes to http://www.ftdichip.com/Support/Documents/InstallGuides.htm
