We specialize in hard to find items
All Categories
YOSUN V13H010L54 / V13H010L58 Projector Lamp for Epson ELPLP54 ELPLP58 PowerLite Home Cinema 705HD EX31 EX51 EX71 EB-S7 EB-X7 EB-S8 ex5200 ex7200 ex3200 s10+ Replacement Projector Lamp with Housing
Share Tweet
of brand new stock?
or
Need this item ASAP?
Check if this is available on Amazon
or available in other sites
Send us the link so we can buy for you
YOSUN V13H010L54 / V13H010L58 Projector Lamp for Features
-
YOSUN 100% new replacement Projector lamp bulb with same functioning as your original one. Perfectly match and compatible for your Projector.
-
FEATURES: It is the lamp with housing, not only a bare bulb. Same as bright and durable lamp wick as the original bulb.
-
COMPATIBLE MODULES: for EPSON PowerLite Home Cinema 705HD PowerLite S7 W7 S8+ EB-S7 EB-X7 EB-S72 EB-X72 EB-S8 EB-X8 EB-S82 EB-W7 EB-W8 EB-X8e ex3200 ex5200 ex7200 h368a eb-w9 eb-x10 eb-x92 s10+ vs200 s9 EH-TW450 EX31 EX51 EX71 H309A H328B Projector.
-
INSTALLATION AND SAFTY: You will find it is quite easy to install it into your Projector as the ways you are taking out your old lamp. Be aware of the connector make sure it connected well. It is not electric, shut down your Projector when you install it.
-
WARRANTY AND RETURN: New replaced lamp will be shipped to you when your bulb was out of work naturally in 180 days. Refundable issue, please contacts our 24 hours/7 days customer service. It is our appreciations if you need any further assistance.
About YOSUN V13H010L54 / V13H010L58 Projector Lamp For
Parameter: YOSUN new replacement Projector bulb with housing. Perfect match is only applicable to your correct Projector model. Lamp Life: 3000-4000 hours COMPATIBLE MODULES: Power Lite Home Cinema 705HD Power Lite S7 W7 S8+ EB-S7 EB-X7 EB-S72 EB-X72 EB-S8 EB-X8 EB-S82 EB-W7 EB-W8 EB-X8e ex3200 ex5200 ex7200 h368a eb-w9 eb-x10 eb-x92 s10+ vs200 s9 EH-TW450 EX31 EX51 EX71 H309A H328B V13H010L54 V13H010L55 V13H010L56 V13H010L58 Projector. Warm Noted: Be sure to use an ELPLP54 Projector Lamp for replacement. Be sure to turn off the unit and unplug the power cord before replacing the lamp The lamp remains hot after the unit is turned off with the TV. If you touch the lamp, you may burn your fingers. When you replace the lamp Wait for at least 0.5 hour for the lamp to cool. Do not touch the surface of the lamp If you touch it, wipe off the fingerprints with a soft cloth Installation: 1. Turn off the Projector and unplug the AC power cord. 2. Loosen the screw on the lamp cover with a screwdriver, and then open the lamp cover. 3. Loosen the 2 screws on the lamp with the screwdriver. Hold up the handle, then pull the lamp straight out. 4. Hold the handle of the new lamp and push it in securely until it reaches the end, and then tighten the 2 screws. 5. Close the lamp cover, and then tighten the screws 6. Plug in the AC power cord.
